Nerf Launcher Valve/Design Question

A place for general potato gun questions and discussions.
sporgo
Recruit
Recruit
Posts: 1
Joined: Thu Mar 26, 2009 3:21 pm

Sat Feb 22, 2020 7:42 pm

I stumbled upon an older video recently of someone firing a CO2 Nerf ball or paintball cannon. They are using an activation handle/valve that I am unfamiliar with but I know I have seen it on some other builds. Could someone shed some light on this design quirk?

User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 36 times
Been thanked: 20 times

Tue Feb 25, 2020 7:34 am

I can't tell from the video but it could just be a linkage to a blowgun valve given the low performance, multi-shot capability, and apparent necessity to tap the trigger very briefly
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Feb 26, 2020 7:30 am

Looks like your traditional three-way valve /QEV setup:

Image

When at rest, the QEV pilot is connected to the main air chamber (filled from a CO2 bottle and presumably going through a regulator to bring the pressure down).

When the three-way valve is actuated, the main chamber is closed off and the QEV pilot is open to the atmosphere, actuating the QEV and firing the projectile by dumping the firing chamber.

When the three-way valve is released, the QEV recloses and the firing chamber is refilled from the main chamber. In the video you can hear the firing chamber refilling after the trigger is released.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply