Inline vortex airtank backpack
- origin unknown
- Corporal

- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I am making an airtank to be worn on my back during an airsoft game for my vortex gun. It is made of 3 pieces of 2" sch40 pvc connected by tees and elbows. The thing will have a regulator and the pieces of 2" pipe will be about 2ft long and I will likely have it pumped up to 180psi and regulated to 90 psi. Will this design hold enough air to empty 2 magazines (about 3000 rounds in my gun) without having to refill?
- Attachments
-
- backpacktank.JPG (13.62 KiB) Viewed 5695 times
-
keep_it_real
- Specialist 3

- Posts: 320
- Joined: Sat Dec 23, 2006 4:41 pm
- Location: Bend, Oregon
Sorry to be negative but I doubt it. 3000 rounds is about 30 seconds for a vortex. If I recall correctly, Mr. Plow had a 5 lb. co2 tank that lasted 20,000 rounds or something like that. A 5 lb co2 tank holds LOTS of air because it's a liquid.
- homedepotpro
- Specialist 4

- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
do some experimenting with a blow gun and an air compressor to see how long it takes to empty the tank
-
Mac/pistol man
- Private 4

- Posts: 73
- Joined: Sat Apr 28, 2007 2:41 pm
3" couldn't be compressed very high, unless you used schedule 120! Aha!! You could order some schedule 120 pvc, in like 3" that could be pressurized to roughly 440 psi.

Here is a schedule 120 pressure chart from Harvel pvc.
So, if you want to make a backpack out of pvc, use schedule 80 or 120, not chedule 40. Personally, I would use 120, but it is expensive..

Here is a schedule 120 pressure chart from Harvel pvc.
So, if you want to make a backpack out of pvc, use schedule 80 or 120, not chedule 40. Personally, I would use 120, but it is expensive..
- Thursto
- Specialist 3

- Posts: 389
- Joined: Fri Mar 02, 2007 5:11 am
- Location: Australia, SA, Adeliade, Para Hills
Hey man, if this was me making one out of pipe, i would make mine like this, they are all linked up threw brass niples and pressure rated hose. and each one is about 60cm long 3" wide. the hose at the bottem is the one that leads to your gun.
- Attachments
-
- How mine would be...
- backpack 3x3 inch chamber.jpg (26.83 KiB) Viewed 5634 times
- frankrede
- Sergeant Major 2

- Posts: 3220
- Joined: Thu Jul 20, 2006 9:47 pm
- Has thanked: 1 time
- Been thanked: 1 time
3" sch-40 would be safe up to 150 by my safety standards.Mac/pistol man wrote:3" couldn't be compressed very high, unless you used schedule 120! Aha!! You could order some schedule 120 pvc, in like 3" that could be pressurized to roughly 440 psi.
Here is a schedule 120 pressure chart from Harvel pvc.
So, if you want to make a backpack out of pvc, use schedule 80 or 120, not schedule 40. Personally, I would use 120, but it is expensive..
It would hold alot more air than 2".
and wtf?
sch 120 would weigh so much on your back.
40 would be bad enough, especially in a airsoft type game
Current project: Afghanistan deployment
-
Mac/pistol man
- Private 4

- Posts: 73
- Joined: Sat Apr 28, 2007 2:41 pm
Are you kidding me? PVC weighs nothing... Expecially if it is above your COG. Like, In real airsoft, one of my friends has a 45 lb vest full of gear... So, PVC would be nothing...frankrede wrote:3" sch-40 would be safe up to 150 by my safety standards.Mac/pistol man wrote:3" couldn't be compressed very high, unless you used schedule 120! Aha!! You could order some schedule 120 pvc, in like 3" that could be pressurized to roughly 440 psi.
Here is a schedule 120 pressure chart from Harvel pvc.
So, if you want to make a backpack out of pvc, use schedule 80 or 120, not schedule 40. Personally, I would use 120, but it is expensive..
It would hold alot more air than 2".
and wtf?
sch 120 would weigh so much on your back.
40 would be bad enough, especially in a airsoft type game
- origin unknown
- Corporal

- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I just mounted my 7 gallon air tank with a regulator in a backback and it works great. No need for my 15 sec long burst of air from 3 pieces of 2" pvc pipe.
- origin unknown
- Corporal

- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
You can get a 7 gallon tank for like about $20, and the regulator for about $15. You will also need a backback, hose, coupling, a few brass fittings and a barbed fitting. It weighs about 10-20 lbs, like a backpack full of books.
- origin unknown
- Corporal

- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
I'll look for one for ya. Does it have to be from a retailer in Australia? Can you order one from the US? shipping would only be like $15.
- jackssmirkingrevenge
- Five Star General

- Posts: 26219
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 582 times
- Been thanked: 347 times
with 2 litres of air at 100 psi, I get less than 4 seconds worth of firing from my strafer:
[youtube][/youtube]
How about strapping 6 x 3 litre soda bottles to your back?
[youtube][/youtube]
How about strapping 6 x 3 litre soda bottles to your back?
hectmarr wrote:You have to make many weapons, because this field is long and short life
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9 Replies
- 2678 Views
-
Last post by Pilgor
-
- 15 Replies
- 8410 Views
-
Last post by nosebleedXD
-
- 10 Replies
- 4055 Views
-
Last post by iPaintball
-
- 13 Replies
- 6272 Views
-
Last post by Brian the brain
-
- 8 Replies
- 2767 Views
-
Last post by Davidvaini

