Page 8 of 8
Posted: Wed Jul 28, 2010 7:48 am
by Crna Legija
i had a simular incident but with a tee barrel sealer, i made a reducer out of some thick plastic to connect my 40mm pvc barrel to a 3/4 inch nipple, the golf ball got stuck in and blow the barrel off luckily it hit my sand box.
Posted: Mon Aug 09, 2010 7:32 am
by Mpeddlesden
One of my first guns was a pneumatic gun with a "pump" bottle as a chamber and i putt a shotgun wad down the barrel at first fire it didn't fire it out.
The second time i fired it, it did the same so a friend and i opened up the valve and injected air straight into the chamber and barrel the chamber blow up at 95 PSI and i had a shradder valve attached to the end of the pump bottle, when it blew the force broke my wrist and the shradder valve impaled into my wrist just missing my main vain. The pressure put me in a cast and it also made my friend's ears feel like they were on fire.
Posted: Mon Aug 09, 2010 8:20 am
by Crna Legija
holy sh!t that would have hurt
Posted: Mon Aug 09, 2010 10:17 am
by SpudFarm
Mpeddlesden wrote:One of my first guns was a pneumatic gun with a "pump" bottle as a chamber and i putt a shotgun wad down the barrel at first fire it didn't fire it out.
The second time i fired it, it did the same so a friend and i opened up the valve and injected air straight into the chamber and barrel the chamber blow up at 95 PSI and i had a shradder valve attached to the end of the pump bottle, when it blew the force broke my wrist and the shradder valve impaled into my wrist just missing my main vain. The pressure put me in a cast and it also made my friend's ears feel like they were on fire.
Damn! That sounds really bad..
Was it a long time ago? Glad you are okay.
Posted: Mon Aug 09, 2010 11:24 pm
by Mpeddlesden
It happened about A year ago and my wrist healed but there is a Dirty big scare down my wrist. =-(
Posted: Tue Aug 10, 2010 1:55 pm
by bighead33
this is why there should be a form for stuff like this so people can lean from other peoples mistakes.
Posted: Sun Sep 05, 2010 7:26 am
by Crna Legija
I connected the hose from my fire extinguisher to the 3 way valve on my cannon, to see if it would pilot it to get semi auto, i didn't tighten the the compression fitting much and when i dumped pressure into the hose it came of with 350psi out the end and wiped me on the neck
it didn't hurt to much but left two nice cut
when i came back from the mirror, i looked at the hose and could see a bit of skin on the tip
Posted: Sun Sep 05, 2010 7:34 am
by jackssmirkingrevenge
-_- wrote:it didn't hurt to much but left two nice cut
Let's hope you don't have a jealous girlfriend that comes to hasty conclusions
Posted: Sun Sep 05, 2010 9:14 am
by Crna Legija
meh girlfriends, they cost to much
