PAC WithOutLoss

[Petitlu]

it worked well!

yes solidworks

[sharpshooter11000]

Wow, you're great with SolidWorks! Did you use the revolved boss/base tool?

[Petitlu]

yes for o-ring

[smirpab]

Hi Sharpshooter 11000,

As for O-rings, I used the tool "Boss / Base with revolution."
And for "Gorges", I used the tool "Material removal with revolution."

That is, if you have other questions for the modeling does not hesitate.

[Petitlu]

Hello!
I just made a shot at 60bar - 870psi-and with the short barrel!
Good result!

[youtube][/youtube]

Compilation and comparison:

[youtube][/youtube]

[Petitlu]

[Petitlu]

hello!
after the success of Withoutloss, I want to do the same but in auto, I have schematics but I want it looks like an AS50 but I do not have plans, you know where I can find?
thank you!

[jackssmirkingrevenge]

there are plenty of 3d models out there:

http://www.markverkerk.nl/index.php/201 ... onal-as50/

http://www.the3dstudio.com/product_deta ... uct=346113

how do you plan on making it auto/semi though? Surely you can only make it manually operated bolt action.

(great videos on the last post btw, kudos!)

[Petitlu]

are plans to buy ...
you have patterns with dimensions?

Here are the full auto diagram
I begin construction

[jackssmirkingrevenge]

A little complex but I can see it working as drawn, you basically have to alternate the process of feeding a projectile and filling the chamber.

If might be feasible to include an electric element as well and have a solenoid feeding the projectile.

[Petitlu]

I thought of a solenoid but I do not want any part electric, no batteries ...

the prototype one :



two :

Pop-off:


magazine :

[Gun Freak]

Damn son, you don't waste any time!

[al-xg]

The main problem I can see will be that the pop-off valve may re-seat before the air ram has fully retracted and the next projectile entered the breach.
I guess that could be fixed with a check valve in parallel with a flow restriction to try and trap air in the pop-off valve giving more time for projectile loading before it re-seats. What's a little bit more complexity at this point ?

Petitlu is great, give him a crazy drawing and he actually goes off and makes it work, then puts high pressure in it

[Petitlu]

Al-xg helps me a lot in this project, it's normal it was he who pushed me to do!

I'm thinking about restricting the pop off ...

[jackssmirkingrevenge]

Petitlu is great, give him a crazy drawing and he actually goes off and makes it work, then puts high pressure in it

Spudfiles needs more people like him