Posted: Sat Feb 04, 2012 6:45 am
it worked well!
yes solidworks
yes solidworks
Page 9 of 12
Posted: Sat Feb 04, 2012 7:45 am
Wow, you're great with SolidWorks! Did you use the revolved boss/base tool?
Posted: Sat Feb 04, 2012 7:51 am
yes for o-ring
Posted: Sat Feb 04, 2012 7:57 am
Hi Sharpshooter 11000,
As for O-rings, I used the tool "Boss / Base with revolution."
And for "Gorges", I used the tool "Material removal with revolution."
That is, if you have other questions for the modeling does not hesitate.
As for O-rings, I used the tool "Boss / Base with revolution."
And for "Gorges", I used the tool "Material removal with revolution."
That is, if you have other questions for the modeling does not hesitate.
Posted: Wed Feb 08, 2012 10:07 am
Hello!
I just made a shot at 60bar - 870psi-and with the short barrel!
Good result!
[youtube][/youtube]
Compilation and comparison:
[youtube][/youtube]
I just made a shot at 60bar - 870psi-and with the short barrel!
Good result!
[youtube][/youtube]
Compilation and comparison:
[youtube][/youtube]
Posted: Wed Feb 08, 2012 1:09 pm
Posted: Thu Feb 16, 2012 3:59 pm
hello!
after the success of Withoutloss, I want to do the same but in auto, I have schematics but I want it looks like an AS50 but I do not have plans, you know where I can find?
thank you!
after the success of Withoutloss, I want to do the same but in auto, I have schematics but I want it looks like an AS50 but I do not have plans, you know where I can find?
thank you!
Posted: Thu Feb 16, 2012 4:39 pm
there are plenty of 3d models out there:
http://www.markverkerk.nl/index.php/201 ... onal-as50/
http://www.the3dstudio.com/product_deta ... uct=346113
how do you plan on making it auto/semi though? Surely you can only make it manually operated bolt action.
(great videos on the last post btw, kudos!)
http://www.markverkerk.nl/index.php/201 ... onal-as50/
http://www.the3dstudio.com/product_deta ... uct=346113
how do you plan on making it auto/semi though? Surely you can only make it manually operated bolt action.
(great videos on the last post btw, kudos!)
Posted: Thu Feb 16, 2012 4:50 pm
are plans to buy ...
you have patterns with dimensions?
Here are the full auto diagram
I begin construction
you have patterns with dimensions?
Here are the full auto diagram
I begin construction
Posted: Thu Feb 16, 2012 5:26 pm
A little complex but I can see it working as drawn, you basically have to alternate the process of feeding a projectile and filling the chamber.
If might be feasible to include an electric element as well and have a solenoid feeding the projectile.
If might be feasible to include an electric element as well and have a solenoid feeding the projectile.
Posted: Thu Feb 16, 2012 5:39 pm
I thought of a solenoid but I do not want any part electric, no batteries ...
the prototype one :
two :
Pop-off:
magazine :
the prototype one :
two :
Pop-off:
magazine :
Posted: Thu Feb 16, 2012 6:49 pm
Damn son, you don't waste any time! 
Posted: Thu Feb 16, 2012 7:58 pm
The main problem I can see will be that the pop-off valve may re-seat before the air ram has fully retracted and the next projectile entered the breach.
I guess that could be fixed with a check valve in parallel with a flow restriction to try and trap air in the pop-off valve giving more time for projectile loading before it re-seats. What's a little bit more complexity at this point ?
Petitlu is great, give him a crazy drawing and he actually goes off and makes it work, then puts high pressure in it
I guess that could be fixed with a check valve in parallel with a flow restriction to try and trap air in the pop-off valve giving more time for projectile loading before it re-seats. What's a little bit more complexity at this point ?
Petitlu is great, give him a crazy drawing and he actually goes off and makes it work, then puts high pressure in it
Posted: Fri Feb 17, 2012 1:25 am
Al-xg helps me a lot in this project, it's normal it was he who pushed me to do!
I'm thinking about restricting the pop off ...
Posted: Fri Feb 17, 2012 1:29 am
Spudfiles needs more people like himal-xg wrote:Petitlu is great, give him a crazy drawing and he actually goes off and makes it work, then puts high pressure in it