PSR .50cal [final]

[blind909]

Wye is the letter "Y", just spelled out.

[Darkside 6ix]

Ahh, well I finally got a chance to get the Tee. But you guys might just be blinded by my primer job... I had purple primer mixed with dark blue pvc cement and it looks like $#!T...No exadgeration. And while I was at the hardware store, I couldnt buy spray paint because I had to be 18 years or older because of kids my age graffitiing the city and *getting high* off of the spraypaint. Explain that to me?!?! So if you'll bare with me, I need to find me moms camera to snap some pics, and possibly a video of some damage. Well you guys are going to have to wait to see my crappy job of the gluing and will have to deal with it untill I find some spray paint. I shall be updating the thread soon.

[Darkside 6ix]

Sorry for double posting, but I couldnt think of another way to bring this topic back up. Im finally finished with the gun and I am pretty pleased with it. It packs quite a punch for only being fired up at 50psi. I cant bring it up past 50 because I have a $#!tty pump and It is still pretty hard to get it up to 50. Hope you guys like it

[koolaidman]

looks good. Did you leave the bipod unglued and foldable like i did? are you getting a good seal between the end of the barrel and the sprinkler? even at 50 psi im sure it rocks, youre missin out on half the power though.

[Darkside 6ix]

Yeah, I do get a good seal. I just wrapped the end of the 1/2" with electrical tape. The fitting that I had, had a beveled inside so it made a good seal. And yes, I did leave the bipod unglued. Thanks for the ideas though