Page 2 of 2
Posted: Mon Aug 18, 2008 11:01 am
by trollhameran
Yeah I imagine that would be fairly hard to do, I could fill it with something, but the block would be too wide, which would mean i'd have to make the slide alot longer, the other option would be to get a 15mm bar and drill out both sides.
Posted: Mon Aug 18, 2008 11:04 am
by Brian the brain
Or take a pice of rubber hose, around 13 mm diameter.
Take a bolt and screw and compress the piece of hose on the inside of the 15 mm tube, using the bolt and nut.
I used that idea on my blow-forward bolt and it held together fine.
Not sure how it will erform under constant high pressure though
Posted: Mon Aug 18, 2008 11:42 am
by trollhameran
Hmm that could work, ill have to check that out sometime soon.
Posted: Mon Aug 18, 2008 3:32 pm
by psycix
Not sure how it will erform under constant high pressure though
*pop*
You can always do it with epoxy
Posted: Mon Aug 18, 2008 3:38 pm
by trollhameran
JSR would certainly approve if I used epoxy for it
Posted: Mon Aug 18, 2008 4:15 pm
by Brian the brain
The drilling out a solid rod idea seems better.
The hose thing will surely pop.If not today, then tomorrow.So...
I should not have mentioned it, knowing the pressures you use.
Posted: Mon Aug 18, 2008 4:27 pm
by trollhameran
If I used the hose idea I would constantly be thinking is it going to burst this time.
I will try and fine some rod that is the right diameter, im in no hurry at the moment though, because I only need it for a pilot at the moment.
Having a bit of trouble attaching the trigger at the moment, I cant solder to save my life
Maybe ill pm Rag and ask how he fixed the trigger on heal.
Posted: Mon Aug 18, 2008 5:27 pm
by ALIHISGREAT
Having a bit of trouble attaching the trigger at the moment, I cant solder to save my life
Maybe ill pm Rag and ask how he fixed the trigger on heal.
you could try epoxy, or a hose clamp?