Page 2 of 2
Posted: Tue Feb 17, 2009 12:38 am
by jackssmirkingrevenge
Pookydarts wrote:I picked up a wad a few months ago that fitted that barrel tube perfectly but now that I go looking again all the wads seem to be of a different type with a slightly over-bore diameter! Will have to change brands!
Measure your actual bore diameter then have a look at
this wiki article, there's a conversion table of the actual bore diameter of the various gauges, you can see which is most suitable.
Posted: Tue Feb 17, 2009 12:48 am
by starman
Pookydarts wrote:Starman, the barrel will get fastened during the future upgrades... And I hope it will deserve sights too!
Sure, a sight would work and look great on there.
BTW, the girls on Spudfiles are few and far between. KRN, frankrede's GF is the only one I know of presently participating.
Posted: Tue Feb 17, 2009 4:13 am
by Pookydarts
Cheers for the link Jack!
It would appear to be about a 13 and a 1/2 gauge...
I'll have another look through the shed, it must have been some other tube that I put the wad in and got all
about!
