Page 2 of 2
Posted: Wed Jul 01, 2009 6:54 am
by Technician1002
-_- wrote:im not using the steal coz its not seamless and would cut in to my o rings
I sanded mine for my last two launchers, a 2 inch and a 1 inch. The pipe is not seamless, but after sanding smooth it seals very well.
Check youtube under my user name. I have video of it working.
Posted: Wed Jul 01, 2009 7:01 am
by Crna Legija
thanks of the help guys and i glued it all up and let it dry.
dam glue
as for copper and aluminium pipe i cant solder but i know its not hard and aluminium pipe i cant weld at all only have a arc welder and not going to buy mig for one pump
Posted: Wed Jul 01, 2009 8:03 am
by POLAND_SPUD
you can always thread an alu pipe. IIRC psycix did that with no problems... well infact I think it must be easier with alu than with iron pipes
Posted: Wed Jul 01, 2009 8:52 am
by Crna Legija
i don't have a out side pipe threader on don't want to buy some aluminium pipe. i put epoxy on the hole pvc pipe and sleeved it already ill finish it tomoz