Page 2 of 2
Posted: Sun Jul 12, 2009 9:24 pm
by c11man
for a much better barrel sleeve some 1/2inch sdr 13.5 inside of that barrel and it will be a perfect fit!
Posted: Sun Jul 12, 2009 9:28 pm
by DinerKid
uuuuuum the whole idea was to not have a perfect fit to offer a smooth transition from ball valve to barrel and to lower the fps to keep the paint balls from deforming and curving. i know about sch80 3/4" and about the sleaving of 1/2" sdr but that is not optimal for my goals for this cannon although it would increase fps.
Posted: Sun Jul 12, 2009 9:31 pm
by c11man
oh yeah i do have trouble with curving.... sorry mised that. how good of accuracy can you have with that loose of a barrel?
Posted: Sun Jul 12, 2009 9:34 pm
by DinerKid
well i hit a 2 foot target at about 150 feet about 80% of the time so accuracy is not an issue
the 20% is when i use some of the paint balls that are kinda soft and they curve bad. i am getting more tomorrow. i either hit the target or miss by like ten feet.
remember while it may be a little loose i have 43" of it so that's quite a while to straighten out the pb
Posted: Tue Jul 14, 2009 7:41 pm
by DinerKid
Damege pics are up on the original post.