SpudFiles

PS. what do u think of the stock everybody I'm busy finishing it off now as we speak

Here are the pics of it half done, just got to thin the grips out for a more comfortable holding.

It looks as though you're using 3/4" thick board for your stock. A good starting point, but what gun stock is actually that thin throughout?

I would suggest getting some 1/4" thick material and placing it on the grip and the butt plate. The thinnest I've ever made a grip was 1", and I still used excess material to bulk it up for my hand.

Edit: Put the 1/4" stuff on BOTH sides in a symetrical fashion, paint the 3/4" stuff black, and stain the 1/4" before final assembly and it will be sure to turn heads.

Gippeto wrote:You've also hooked your blowgun up backwards. It's alright to try it that way, (maybe you get lucky?) but I wouldn't expect it to seal.

I have a GD-10, just like that.

And indeed, it will not seal, if hooked up backwards.

Doesn't mean that none of them will seal. But mine sure doesn't.

OK so I went out to this local paint ball shop the one I got the Canister from and told him about my build he was really amazing took me to the back and started going over parts he had from old stock that would work and the pressures they could handle and the outcome is this

<a href="" title="IMG_20101120_081559 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4087/519 ... 3151d9.jpg" width="500" height="376" alt="IMG_20101120_081559"></a>

nice hey, I might extend the cable more to my hip belt.

<a href="" title="IMG_20101120_081606 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4087/519 ... b5d6a7.jpg" width="500" height="376" alt="IMG_20101120_081606"></a>

using a paint ball valve and turning it to only allow a little pressure into the chamber until I have the pressure I want.

<a href="" title="IMG_20101120_081615 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4112/519 ... 4a6bf9.jpg" width="500" height="376" alt="IMG_20101120_081615"></a>

Ok now I just have to replace these plastic bits and im ready to go

I saw what u mean about the PVC glue pulled it out with my bare hands going to get some epoxy today and use that

OW YA I showed my GF how the valve works by opening and shooting some gas off had about 2 quick bursts and I was out. Is That really the capability of this thing if I can only get 2 shots off ??

What i mean is everything attached (fully built) will i only get 2 shots ??

sumisukyo wrote:OW YA I showed my GF how the valve works by opening and shooting some gas off had about 2 quick bursts and I was out. Is That really the capability of this thing if I can only get 2 shots off ??

Age old story....

Oxbreath wrote:Age old story....

Beat me to it

But seriously, unless your sprinkler valve takes ages to re-close, you should be getting a lot more than just 2 shots.

using a paint ball valve and turning it to only allow a little pressure into the chamber until I have the pressure I want.

Sprinkler valves usually require a minimum pressure to close, you might be dumping gas through the barrel until this happens. Do you mean you open the paintball tank to pressurise the chamber, close it, then fire and repeat?

Sprinkler valves usually require a minimum pressure to close, you might be dumping gas through the barrel until this happens. Do you mean you open the paintball tank to pressurise the chamber, close it, then fire and repeat?

YA thats it until i find a better option or build a second gun.
PS the rand is really weak and this entire build has cost me 2000 rand
thats just under 200 dollars that really sucks we don't have hobby stores [/quote]

I get my paintball parts from eBay, cheap as chips and usually good quality stuff, although shipping might take a while.

jackssmirkingrevenge wrote:I get my paintball parts from eBay, cheap as chips and usually good quality stuff, although shipping might take a while.

HAHA NICE ONE !!!!
ok ok ok sorry I should explain myself,
THIS IS SOUTH AFRICA
THINGS GET STOLEN IF THEY ARE NOT BOLTED TO THE FLOOR!!!
Post if its not a letter doesn't arrive

Its not a place u trust Ebay to safely travel, You know how u can track where your package is, this is South Africa
leaves America... flies over the ocean... Hits Africa... and ... your package no longer exists in our database

sumisukyo wrote:THINGS GET STOLEN IF THEY ARE NOT BOLTED TO THE FLOOR!!!

I see a business opportunity selling spanners then

jackssmirkingrevenge wrote:

sumisukyo wrote:THINGS GET STOLEN IF THEY ARE NOT BOLTED TO THE FLOOR!!!

I see a business opportunity selling spanners then

well also being a South African, I can tell you that bolts does not stop them if they really want to break or steal something they will find a way...
an example of this is, I have once found a vandalized mailbox in a ditch that had been ripped out of a wall even though it had been fastened with 4 12mm rawl bolts I am still wondering how they managed to just rip it out of the wall like that...

besides jack they would most likely hold you up at gunpoint and steal your spanners.

OK my next step is to modify the sprinkler valve correctly so here are my steps
<a href="" title="1 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4149/519 ... 02cf98.jpg" width="500" height="376" alt="1"></a>
<a href="" title="2 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4145/519 ... 492223.jpg" width="500" height="376" alt="2"></a>
<a href="" title="3 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4084/519 ... d257d4.jpg" width="500" height="376" alt="3"></a>
<a href="" title="4 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4148/519 ... 944cf7.jpg" width="500" height="376" alt="4"></a>
<a href="" title="5 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4091/519 ... d2c7d8.jpg" width="500" height="376" alt="5"></a>
<a href="" title="6 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4124/519 ... 174728.jpg" width="500" height="376" alt="6"></a>
I realize this next black seal is upside down I'v corrected that.
<a href="" title="7 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4092/519 ... e7c086.jpg" width="500" height="376" alt="7"></a>
<a href="" title="8 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4015/519 ... 4cbbe6.jpg" width="500" height="376" alt="8"></a>
Epoxy sealed the hole as most instructions say to do.
<a href="" title="9 by crks_wolf, on Flickr"><img src="http://farm5.static.flickr.com/4106/519 ... db3188.jpg" width="500" height="376" alt="9"></a>

Have i done it correctly ??
Because Air just goes right through it
i used these instruction
http://www.thehalls-in-bfe.com/GGDT/lib ... 1_mod.html
Side note: If i push down onto the white membrane it stops the flow ??
PS just in-case I've removed the epoxy from that small hole in the last picture.

Many tanks are shipped with a low pressure dry Nitrogen charge to prevent moisture from entering the tank. They are almost never shipped with a full pressure charge due to shipping regulations.

If you bought a "tank" you got just the cylinder. If you bought a canister of Nitrogen or CO2 you got a canister of gas.

This shipping pressure would be good for your 2 shots.

Did you buy gas?

sumisukyo wrote:

jackssmirkingrevenge wrote:I get my paintball parts from eBay, cheap as chips and usually good quality stuff, although shipping might take a while.

HAHA NICE ONE !!!!
ok ok ok sorry I should explain myself,
THIS IS SOUTH AFRICA
THINGS GET STOLEN IF THEY ARE NOT BOLTED TO THE FLOOR!!!
Post if its not a letter doesn't arrive

Its not a place u trust Ebay to safely travel, You know how u can track where your package is, this is South Africa
leaves America... flies over the ocean... Hits Africa... and ... your package no longer exists in our database

if shits like that id save my money and get fuk out of there, if they dont steal my plane tickets.

Technician1002 wrote:Many tanks are shipped with a low pressure dry Nitrogen charge to prevent moisture from entering the tank. They are almost never shipped with a full pressure charge due to shipping regulations.

If you bought a "tank" you got just the cylinder. If you bought a canister of Nitrogen or CO2 you got a canister of gas.

This shipping pressure would be good for your 2 shots.

Did you buy gas?

Yes the tank is a paintball tank fulled when I purchased it.

PLEASE DONT TELL ME IM STUPID PLEASE DONT TELL ME THE SPRING GOES ON TOP !!!!!!!!!
(sorry if theres a all caps rule but seriously dont tell me)