SpudFiles

thanks for you thoughts. i'm thinking i should still go through with this. i'm too much of a fan of the game not to
i'll cope with the lower power.
as to the part with the fan, i'm a little skeptical about how effective it'll be. seeing the best spot to but it is right behind the barrel, the main part of the chamber would(i think) be left out of the mixing/venting process.

I'd just stick it under the barrel somewhere out of the way. It just has to mix the fuel and air a bit before firing, and provide a bit of turbulence when firing. Don't put it behind the barrel as you'd have to shorten it even further to provide a path for the combustion gasses.

That seems a tad tricky, and inaccessible if something were to break
but what direction would it point? im guessin toward the back.

Any direction would work, if you're just using it for mixing (not for exhausting combustion gasses).

Speaking of which, how do you plan to vent the chamber between shots?

Insomniac wrote: Speaking of which, how do you plan to vent the chamber between shots?

i was thinking of changing the back end piece from a reducer to a threaded coupler as show below

What is your TF2 name? Mine is "MOMMY WHERES MY FORESKIN?" Maybe I have seen you on.

...Charming Moonbogg....

it's......................
chril
lol

First we get Portal freaks and now TF2 ones.

My question is where are all my Half-Life homeboys?

In city 17. It's safer there.

Or I guess in Ravenholm wearing a Xen hat.

...

Don't even get me started on hats.