Will this inflate my airgun?

[Alster370]

Seems a shame that their isn't a way to modify these cheap things to be somewhat useful. If I ever have any spare money, I wouldn't mind tearing one apart out of curiosity.

[POLAND_SPUD]

they are cheap... and by cheap I don't mean they cost very little (but they do) I mean they are of very poor quality


want something that's robust and inexpensive ? get a fridge compressor

[Zeus]

They can be converted to hand cranking, but it'll take ages to fill. The compressor is quite robust, the motor however is a complete POS.

I have a few very fast and quite powerful DC motors around, so if this motor dies, in goes a ~200W 12V motor.

[mattyzip77]

you are wasting your time and your money if you get one of these, trust me. And if you have a sprinkler valve, piston valve, or a qev it probably wont even actuate it. Start saving your pennies my friend. You can get a cheapo compressor for like 40 50 bucks american!!

[Goats spudz]

i might get a fridge compressor

[jsefcik]

That will work then you can go up too 500 psi and higher!!!

[Goats spudz]

http://www.technobotsonline.com/quick-e ... -4-in.html this is my valve will it got to 400psi

[mattyzip77]

http://www.technobotsonline.com/quick-e ... -4-in.html this is my valve will it got to 400psi

Yes, and probably alot higher for that matter!! Good Luck!!!

[Mr.Tallahassee]

I would get two of those at least and test one up to its highest pressure. The body will last but it's normally the piston(?) that goes. Be safe and cut 20-25% of the failure pressure as a safety margin.

[mattyzip77]

Yea dude, dont go too small, you need either a homeade pump or bike pump or compressor,

Wow Jesse that is some really good advise dude!! I wish I was as smart as you!!! Good job!!!!

[jsefcik]

Yea dude, dont go too small, you need either a homeade pump or bike pump or compressor,

Wow Jesse that is some really good advise dude!! I wish I was as smart as you!!! Good job!!!!

Thanks Buddy!!

[Crna Legija]

heres a link to how to make a high pressure pump.

[nathanhd123]

Just go to a scrap yard and pick up an old fridge compressor. That way it wont cost you anything apart from the few small things needed to change the outlet fittings to fit your gun.

[Goats spudz]

if i go to the local rubbish tip will they give me one because *apparently* they have to dispose of them properly ?