Posted: Mon Mar 12, 2012 2:13 am
ookook wrote:You are so happy
You are in the admiring happiness
Page 2 of 3
Posted: Mon Mar 12, 2012 4:10 am
电磁阀+快排阀jackssmirkingrevenge wrote:ookook wrote:You are so happy
You are in the admiring happiness
Posted: Mon Mar 12, 2012 4:16 am
电磁阀+快排阀 = Solenoid valve + Quick Exhaust Valve
Very well played, google translate!
Very well played, google translate!
Posted: Mon Mar 12, 2012 8:07 am
I think we're going to get on well together电磁阀+快排阀 = Solenoid valve + Quick Exhaust Valve
你有一台冰箱压缩机?
Posted: Mon Mar 12, 2012 9:21 pm
"I think we're going to get on well together "
Thank you
In China,Buy a refrigerator compressor to $ 70,
I chose a relatively low cost "gas spring" to transform
Cost is only $ 3
Thank you
In China,Buy a refrigerator compressor to $ 70,
I chose a relatively low cost "gas spring" to transform
Cost is only $ 3
Posted: Mon Mar 12, 2012 9:29 pm
hi
Posted: Mon Mar 12, 2012 10:54 pm
Brilliant idea! Ready made piston head, pump body, and that can take a lot of pressure!
What pressure can you reach with this setup?
Posted: Tue Mar 13, 2012 12:03 am
If the transformation is well, you can hit 4Mpajackssmirkingrevenge wrote:
Brilliant idea! Ready made piston head, pump body, and that can take a lot of pressure!
What pressure can you reach with this setup?
Posted: Tue Mar 13, 2012 12:23 am
580 psi for the non metricated, impressive!
Posted: Tue Mar 13, 2012 12:51 am
You can remove one from an old fridgeIn China,Buy a refrigerator compressor to $ 70
so it seems... not a bad ideaBrilliant idea! Ready made piston head, pump body, and that can take a lot of pressure
Could you explain how to 'transform' it?If the transformation is well
(how to modify it into a pump)
Posted: Tue Mar 13, 2012 1:10 am
Seems fairly simple - drill a hole in one end and add a check valve.POLAND_SPUD wrote:Could you explain how to 'transform' it?
(how to modify it into a pump)
Posted: Tue Mar 13, 2012 7:23 pm
Wow thats a great idea, i am right in thinking that those are the things on the boots of cars right?
Posted: Wed Mar 14, 2012 12:39 am
Yup... you want to find one with a relatively small inner diameter (sub 0.75") and long stroke to be a useful pump. Or you can get that fridgy workingkillerbanjo wrote:I am right in thinking that those are the things on the boots of cars right?
Posted: Wed Mar 14, 2012 3:22 am
你在哪里买到的零件？
今年夏天我要到中国去，hope I can buy some nice stuff there .
BTW I didn´t use a google translator
今年夏天我要到中国去，hope I can buy some nice stuff there
.BTW I didn´t use a google translator
Posted: Thu Mar 15, 2012 1:16 am
wyz2285 wrote:你在哪里买到的零件？
今年夏天我要到中国去，hope I can buy some nice stuff there
BTW I didn´t use a google translator
您的中文挺好的，
Welcome to China