Page 2 of 2
Posted: Mon Aug 07, 2006 2:34 am
by MrCrowley
pyrogeek wrote:I know this would weaken the barrel, but to what extent would it if you just cut thin lines so that instead of it shattering it would just like blow apart on one side or into 2 pieces?
Why don't you just buy sch40/80 it would be more of a hassle to cut the pipe carefully and skillfully into the pipe.
Posted: Mon Aug 07, 2006 3:11 am
by Brian the brain
Or build a "box"over it out of plywood or mdf.
Or just a sideplate and one on top.It would keep you out of harms way...
Posted: Mon Aug 07, 2006 3:20 am
by MrCrowley
or not
just buy the god damn pipe for f*cks sake
jk 8)
well if your in my shoes where it is hard to get pressure pipe i would just sleeve it with DWV pipe
Posted: Mon Aug 07, 2006 8:56 am
by Dom
If you read my post carefully, I'm not saying to use ONLY duct tape. I'm saying to roll the gun in metal wires, and then wrap it in Duct Tape. To hold it and for extra confort.
Posted: Mon Aug 07, 2006 9:55 pm
by MisterSteve124
it would probably only do something if u used at least 2 inches of duct tape I mean 2 inches thick
Posted: Tue Aug 08, 2006 12:31 am
by MrCrowley
depends how thick/strong the wire is really.
Posted: Tue Aug 08, 2006 12:40 am
by carlbelcher
We've been over this before... Trying to reinforce pipe is a bad idea. If you think your cannon is going to explode, either use less pressure or buy better pipe.
Posted: Tue Aug 08, 2006 11:41 am
by spudder1
Using any thing will not help, It will just cause more pressure. When PVC explodes IT EXPLODES.
Posted: Tue Aug 08, 2006 11:47 am
by Dom
Viva El ABS
(for combustion.)
Posted: Tue Aug 08, 2006 12:57 pm
by noname
OK, so there's 3 things.
1. Use good pipe that you trust.
2. Sleeve it in ABS, which won't shatter.
3. Put it a strong metal box.
End of dicussion.