Underwater Air Supply

Meaningful discussion outside of the potato gun realm. Projects, theories, current events.
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

I could just use the boat's anchor and rope for the lowering system.

I don't really want to deal with pressurised tanks, but if I had to, how long do you think a 3" X 12" PVC tank at 100PSI regulated down to 1ATM would last me?

So if I added 2 check valves (C) to BLB's idea, air would come through the top check valve, down the pipe, through the other, into my lungs and exhaust through the bottom. Thanks for the help on that part.

C
I I
I I~~~~~~~
I I
I I
I I
C
I = Mouth
I I
Open Water
"There isn't a problem in the world that can't be solved by the proper application of explosives"
User avatar
M3NT4L
Specialist 2
Specialist 2
Posts: 239
Joined: Wed Jul 05, 2006 7:40 pm

If you just want to mess around i have an idea for you. Once i was in the beach with one of my fire extinguisher guns, well i had the bright idea to return it to a regular fire extinguisher for a day, i felled it up to 150 or so and but some weighs on, the thing is that you have to push the lever ever so slightly because if not YOU DIE. It was fun for the 4 minutes it lasted.
Image
User avatar
frankrede
Sergeant Major 2
Sergeant Major 2
Posts: 3220
Joined: Thu Jul 20, 2006 9:47 pm
Has thanked: 1 time
Been thanked: 1 time

M3NT4L wrote:If you just want to mess around i have an idea for you. Once i was in the beach with one of my fire extinguisher guns, well i had the bright idea to return it to a regular fire extinguisher for a day, i felled it up to 150 or so and but some weighs on, the thing is that you have to push the lever ever so slightly because if not YOU DIE. It was fun for the 4 minutes it lasted.
I like this idea the best.
I would modify the lever to open only so much.
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

A full 4 minutes on a relatively small tank, cool, I'd put a regulator on it though, maybe a tank with a ball valve barely opened might do it. I could refill it with a bike pump on the boat. Would it be possible to just use a really small hose, with like a 1mm hole at the beginning?

So basically, home made SCUBA. Maybe I'll put a tank in an old backpack to wear it, just something to screw around with.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
User avatar
boilingleadbath
Staff Sergeant 2
Staff Sergeant 2
Posts: 1635
Joined: Sat Mar 12, 2005 10:35 pm
Location: Pennsylvania, USA

Checkvalves take significant pressure to open, typicaly on the order of 3 PSI.
3 PSI is A LOT of pressure. (although you may be able to find more sensitive ones)
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

3 PSI is'nt really a lot of pressure, air at sea level is 14.7 PSI, so the extra 3 should'nt make too much of a difference. Maybe the ones that use flaps might be easier to open.

P.S. 777th post!
Last edited by Atlantis on Thu Aug 24, 2006 8:08 pm, edited 1 time in total.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
User avatar
M3NT4L
Specialist 2
Specialist 2
Posts: 239
Joined: Wed Jul 05, 2006 7:40 pm

I wouldent use a bike pump if you want to go over 100 psi, unless you have a really good one. Today after reading this topic i modified it and put a locking system so that letting too much pressure get through wasent a problem. I attached a snorkel mouthpeice to it and put a longer hose. I straped it to my back and if you get the right ammount of air go then you can basicaly breathe as if you were outside the water.
Image
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

That's awesome! A PVC tank with a ball valve should do the same thing right? I'm going to try and get a fire extinguisher though.

Can you show a pic of your system?
"There isn't a problem in the world that can't be solved by the proper application of explosives"
User avatar
M3NT4L
Specialist 2
Specialist 2
Posts: 239
Joined: Wed Jul 05, 2006 7:40 pm

I dont have my cam till i go to my dad's but on saturday i will. I think the pvc thing will do the same thing but i think that it will be lighter and buoyancy will be a problem. And if you accidentaly smack the plastic tank against something you are risking it but with the steel extingushers you know it can hold 500+ easy.
Image
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

I always wanted one of those little SpareAir emergency tanks.

What's wrong with holding your breath underwater?
User avatar
M3NT4L
Specialist 2
Specialist 2
Posts: 239
Joined: Wed Jul 05, 2006 7:40 pm

Can you hold your breath underwater 4 minutes. my best was 1 minute 40 seconds and i couldent take it.
Image
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

I could wrap the PVC in a towel or something to protect it. How much pressure does Copper hold?

For bouyancy, I could fill another PVC tank with something really heavy, what else is heavy besides lead, that's readily available? Maybe rocks.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

sand is heavy. dirt is heavy.
User avatar
Atlantis
Corporal 5
Corporal 5
Posts: 955
Joined: Sat Sep 03, 2005 10:26 pm
Location: Florida

I could use sand, not dirt though, if the weight chamber fills with water dirt kinda floats when you stir it at all.

P.S. Use grammar please, and don't change the topic about this.
"There isn't a problem in the world that can't be solved by the proper application of explosives"
User avatar
boilingleadbath
Staff Sergeant 2
Staff Sergeant 2
Posts: 1635
Joined: Sat Mar 12, 2005 10:35 pm
Location: Pennsylvania, USA

Oh... I see my understanding.
I thought one checkvalve was upflow of the mouth, and the other was downflow.

Looks like both are upflow of the mouth... so WHY are they there at all? They arn't accomplishing anything...

Anyway, why shouldn't you hold your breath while using a [sc]uba?
If you take a breath at depth, and then acend, the increased air volume in your lungs could cause a condition known as "collapsed lung".

Not good for you.

(note that normal surface diving doesn't carry this threat, because you are limmited to the amount of air you inhaled on the surface)
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post