Page 14 of 30
Posted: Wed Jun 29, 2011 5:38 am
by jackssmirkingrevenge
aaaand part done
Here it is compared to my first effort, with proper dimensions and everying. I think getting the hang of this:
Posted: Wed Jun 29, 2011 5:50 am
by FighterAce
Chamfer those edges, it will make it look finished and not made by an amateur
Posted: Wed Jun 29, 2011 5:58 am
by jackssmirkingrevenge
FighterAce wrote:Chamfer those edges, it will make it look finished and not made by an amateur
Part not completely done, needs to be turned down to the body diameter
Posted: Wed Jun 29, 2011 6:14 am
by FighterAce
That doesn't stop you from chamfering the inside
Posted: Wed Jun 29, 2011 7:47 am
by jackssmirkingrevenge
FighterAce wrote:That doesn't stop you from chamfering the inside
All in good time
Anyway, nose plug done, finally got the thread right and the hole centred and cut it to the right dimensions
Time to get to the body!
Here's the evolution, from first one which was too short with crap threads, then the second one clearly off centre, and finally the current part.
Posted: Wed Jun 29, 2011 7:52 am
by LeMaudit
Good job!
You know, you only need a few more penguns, and you may convert this whole serie into a mighty row of cartridges
Posted: Wed Jun 29, 2011 11:14 am
by jackssmirkingrevenge
Cheera!
LeMaudit wrote:You know, you only need a few more penguns, and you may convert this whole serie into a mighty row of cartridges
At least it shows me my progress
Body done, needs some proper polishing though:
Posted: Wed Jun 29, 2011 11:27 am
by Crna Legija
ahahahah love your new avatar jsr
Posted: Wed Jun 29, 2011 11:55 am
by warhead052
Maudit and Jsr, When you finish the pen gun I have an idea for you. You might actually like it.
Posted: Wed Jun 29, 2011 12:01 pm
by LeMaudit
When you finish the pen gun I have an idea for you
Can't wait!
Step 8. The piston! At last, something spuddish!
[youtube]
[/youtube]
Next step will introduce a new character... the Mill.
Posted: Wed Jun 29, 2011 12:16 pm
by warhead052
Nice, can't wait to see the next part!
Posted: Wed Jun 29, 2011 12:18 pm
by Crna Legija
LeMaudit wrote:Next step will introduce a new character... the Mill.
oooo, if he find out what lathes been doing.
Posted: Wed Jun 29, 2011 12:27 pm
by jakethebeast
damn that piston is small, the button of my BDU pants is like 10 times larger
Posted: Wed Jun 29, 2011 12:33 pm
by LeMaudit
the button of my BDU pants is like 10 times larger
But you can't keep the pressure then fire with your pants... or can you?
Posted: Wed Jun 29, 2011 12:37 pm
by warhead052
There ya go Maudit. Now incorporate a co2 cartridge and firing mech for semi auto, and I have an idea for shells. If you make it use airsoft bbs I have an excellent idea.
Heres my idea though, make the entire thing able to be taken apart, such as a barrel that unscrews into 3-6 small pieces, scope comes off of rails (of course), stock comes off, bipod, handles, make it be able to fit in a brief case. It shouldn't be that hard right?
Idea for the co2 cartridge, have it in the firing handle, and have a blowgun trigger or something.