SpudFiles

Posted: **Thu Mar 06, 2008 7:14 pm**

very well done on that gun. that looks unreal. whats the power like??

Posted: **Thu Mar 06, 2008 7:15 pm**

Now with the insane airplane fan inside its shoot insane, almost 550 fps beacuse of that

Posted: **Thu Mar 06, 2008 7:18 pm**

Jesus..... The fan really makes that much of a difference aye?

Posted: **Thu Mar 06, 2008 7:19 pm**

yes fan make an insane difference, ive tried to fire then gun with out the fan on but its takes about 5 or six clicks to make it fire, but when the fan is on its fired on the first click no matter what.

Posted: **Thu Mar 06, 2008 7:26 pm**

That's awesome man. Really well done.

Posted: **Thu Mar 06, 2008 7:27 pm**

haha but tis is your thread so, very well done to your cannon too

Posted: **Thu Mar 06, 2008 7:47 pm**

Well I just shot a milo can. It pissed through both sides.......and through the backboard with a small rock at 3m....Definately happy

Posted: **Thu Mar 06, 2008 9:31 pm**

Damn, so clean... Damage pics PLOX

Posted: **Thu Mar 06, 2008 9:35 pm**

I just did the coin test at 250psi. I shot a nail through a 10c piece and an inch into the back board. I shot a 20c piece soon after but I made the tip too sharp and so it had no strength. It got close to going through the coin but the nail tip just collapsed and moulded into the coin. I can't get it out....

If I had some high speed steel nails, I reckon I'd have a bit more luck.

Cheers for the comment Pizlo

Posted: **Thu Mar 06, 2008 9:42 pm**

Wow very nice.
I would really like to see some pics of this awsome damage you speak of or even a vid.
Id bet its loud because I just finished my mini coax(1/2 the size of this) and it makes a surprising crack when it is fired at 200psi and will soon get up to 500psi.
what pressure have you taken it up to?sorry if that has already been mentioned

Posted: **Thu Mar 06, 2008 9:48 pm**

Mitchza89 wrote: Cheers for the comment Pizlo

cheers to you erm.. mate! for making a kick ass gun, I've always liked metal stuff that sorta seems real, thats what I was aiming for with my mini, you should see it on sunday, If the piston making goes well tomorrow.

Posted: **Thu Mar 06, 2008 10:22 pm**

Mmmmm I could go for a cold one about now. It's friday, 1:30pm and I'm still sobar...what the?!?!

What's the spec's on this mini your making?

Bigbob, I usually fire this thing at 250psi but have taken it up to 300+ on a few occassions.

500psi?! damn....how and the hell are ya gonna achieve that? helium? co2?

Posted: **Thu Mar 06, 2008 11:07 pm**

elitesniper wrote:she's not as strong as I expected

toldyouso

*cough*shockpump*splutter*

It pissed through both sides...

Was that a typo or are you just being Australian?

If I had some high speed steel nails, I reckon I'd have a bit more luck.

Nature always choses the path of least resistance, if your projectile is harder than your target then it's easier to penetrate. I use masonry nails, the ones that tend to snap rather than bend if you hit them sideways.

Posted: **Thu Mar 06, 2008 11:10 pm**

yes master jsr i should i have listened, anyways im building a bigger bore piston rifle so i dont have to worry about those, not enough power problems

Posted: **Thu Mar 06, 2008 11:53 pm**

500psi?! damn....how and the hell are ya gonna achieve that?

I will take it up to 500psi with the high pressure pump I am working on.
1/2in type L copper body and a floating o-ring
Should be able to get to 500psi[/quote]

SpudFiles

300+ psi Whammy gun.