Page 3 of 3
Posted: Sun Jul 06, 2008 6:48 pm
by DYI
There has been some speculation in the forum before regarding how much power it would take to shoot an unmodified tennis ball 1 mile.
Didn't we come out with Mach 143 or something?
In essence, the answer was that unless you're in an inert atmosphere, a tennis ball would self-immolate before it went fast enough to travel a mile under its own momentum.
Posted: Thu Apr 30, 2009 3:32 pm
by xpitxbullx
Looking to add the golf ball barrel. Sch 21 pipe is hard to find.
Posted: Thu Apr 30, 2009 6:10 pm
by starman
xpitxbullx wrote:Looking to add the golf ball barrel. Sch 21 pipe is hard to find.
Try Tractor Supply...they are the reliable vendor I have found for it. You might have to try several stores in your general area....some are better at keeping it in stock than others.
Posted: Wed Apr 28, 2010 6:56 am
by xpitxbullx
Couldn't find the 1.5" SDR-21 but I was able to find 1.5" class 200. Ordered it online. It comes today!!! Hope it works well with golf balls.
Even though it's rated at 200 psi, should I sleeve it?
Posted: Wed Apr 28, 2010 9:33 am
by Technician1002
If I'm not mistaken, I think golf balls stick pretty tightly in the 200 PSI stuff. I could not get it to work for me. It makes an excellent spud barrel though.
Note, prior post is a year old, but since it is your thread, I replied. Keep looking for the SDR-21 or use a sabot on 2 inch cell core ABS.
Posted: Wed Apr 28, 2010 1:34 pm
by dewey-1
xpitxbullx wrote:Couldn't find the 1.5" SDR-21 but I was able to find 1.5" class 200. Ordered it online. It comes today!!! Hope it works well with golf balls.
Even though it's rated at 200 psi, should I sleeve it?
SDR21 is class 200. Read this thread:
http://www.spudfiles.com/forums/golf-ba ... t5915.html
Posted: Wed Apr 28, 2010 3:20 pm
by Technician1002
I must have been thinking about the 2.5 inch pipe which does come in 160 and 200 PSI wall thicknesses. Those two are not the same. I have some of both. 160 launches Tennis Balls without burning the fuzz off on the launch. The 200 requires a stick ram rod to insert the ball.
I thought 1.5 inch pipe came in both sizes too. I must have been mistaken.
Posted: Wed Apr 28, 2010 3:42 pm
by dewey-1
Technician1002 wrote:I must have been thinking about the 2.5 inch pipe which does come in 160 and 200 PSI wall thicknesses. Those two are not the same. I have some of both. 160 launches Tennis Balls without burning the fuzz off on the launch. The 200 requires a stick ram rod to insert the ball.
I thought 1.5 inch pipe came in both sizes too. I must have been mistaken.
PVC 1.25, 1.5, 2.0, 2.5 inch and larger pipe is available in:
SDR32.5 or class 125 (125psi)
SDR26 or class 160 (160psi)
SDR21 or class 200 (200psi)
SDR17 or class 250 (250psi)
Posted: Wed Apr 28, 2010 9:05 pm
by xpitxbullx
I just received it today and it says SDR-21 on the side!!! PERFECT!!! Too late to go to the store and get the 2" SCH-80 PVC. Damn! I have to wait until tomorrow when they open.
I'm gonna have some fun tomorrow night
