Page 3 of 4
Posted: Thu Apr 22, 2010 7:24 pm
by clemsonguy1125
Walmarts is cheaper but targets is better
Posted: Thu Apr 22, 2010 7:25 pm
by Gun Freak
In what sense? Is it the same product?
Posted: Thu Apr 22, 2010 7:27 pm
by clemsonguy1125
no targets is black and decker they dont sell dremals only walmart and lowes do
Posted: Thu Apr 22, 2010 7:30 pm
by Gun Freak
Oh ok... I'll look online.
Posted: Fri Apr 23, 2010 3:06 pm
by clemsonguy1125
Ok, I added four screws and am planning on adding the pilot, sealing face and chamber this weekend
Posted: Fri Apr 23, 2010 3:41 pm
by Gun Freak
About how long are the screws? I would have used at least 6 if I were you, but it doesn't really matter. I think I'll build mine this weekend with reedfe.
Posted: Fri Apr 23, 2010 4:54 pm
by clemsonguy1125
they go about halfway or 3/4 into the bushing, there just for testing at 40 psi, then Ill add 4 more longer ones
Posted: Fri Apr 23, 2010 5:00 pm
by Gun Freak
Sounds good. I think I'll have my whole gun done this weekend, but I'm having second thoughts as to even build one or not.
Posted: Fri Apr 23, 2010 5:35 pm
by clemsonguy1125
Why, they work great, make sprinkler valve guns look like beginner guns
Posted: Fri Apr 23, 2010 5:38 pm
by Gun Freak
I know but it will be expensive. I really want tone, and I'll probably build the 2" one.
Posted: Fri Apr 23, 2010 5:42 pm
by clemsonguy1125
expensive, i built one kinda like yours for 20 bucks
Posted: Fri Apr 23, 2010 5:44 pm
by Gun Freak
Without the coolness. Add the chamber, advanced piston, paint, pilot setup (20 bucks alone) and the pipe costs its like 70 or 80 bucks.
Posted: Fri Apr 23, 2010 5:49 pm
by clemsonguy1125
well, or if you do what i did a ballvalve spare pipe and 10 bucks worth of lowes stuff and you set
Posted: Fri Apr 23, 2010 5:56 pm
by Gun Freak
Yeah... I always like to be safe with new pipes.
Posted: Fri Apr 23, 2010 6:03 pm
by clemsonguy1125
a well pvcs made to hold water pressure for years at a times, so holding 60 psi for 20 minutes total wont hurt