Page 3 of 3
Posted: Wed Mar 02, 2011 7:55 pm
by Gun Freak
You're gonna try to shove the whole pipe through the tee?
Posted: Wed Mar 02, 2011 9:07 pm
by Lockednloaded
You just sand out the lip with a bore-hawg; hardly complicated or time consuming
Posted: Wed Mar 02, 2011 10:45 pm
by clemsonguy1125
Yeah, I've tested it with 1/2 inch PVC using a sanding drum on a dremal, took less than 5 mins
Posted: Thu Mar 03, 2011 12:45 am
by Technician1002
Other than a lack of time, I want to build a 2 inch QDV in a 3 inch T as an external valve like a Mauler or similar valve. It could then be used with various size screw on chambers with a 3 inch threaded outlet.
Posted: Thu Mar 03, 2011 8:06 am
by dewey-1
clemsonguy1125 wrote:That what I was missing, air leaking around the piston thanks.
See this link for similar drawings and preliminary ideas for a similar concept to yours.
http://www.spudfiles.com/forums/qdv-tee ... 19158.html