Page 3 of 8
Posted: Sat Sep 17, 2011 7:11 am
by s0ka
Great job petilu
it is (all-homemade )
. I wait for your next video.
Posted: Sat Sep 17, 2011 7:25 am
by Petitlu
Thank you
the shear disc is cut to 80 bar, I will see to change it for one which is cut to 100 bar
Posted: Sat Sep 17, 2011 2:01 pm
by POLAND_SPUD
I think that you should not mix everything and that it is necessary to compare the weapons of the same category: PAC with PAC, hybrid with hybrid
If I change the reservoir I can fire in 300 bar (4500psi) but at the moment I am going to put in it a standard lined in calibre 45
sure, but all I am saying is - > you'd get (at a given pressure) twice the power from a hybrid (more or less)
Posted: Sat Sep 17, 2011 2:05 pm
by Petitlu
ok
I could not make shootings this after midday by cause of rain but tomorrow I will make shootings
I will test my new made steel and wood target
Posted: Sat Sep 17, 2011 3:53 pm
by Brian the brain
Good looking build!
I wonder why it does SHHHH in stead of BANG though...That reservoir is huge compared to that barrel so...what's happening in there?
Did I miss the suppressor?
Maybe the new burst discs will do the trick.
Posted: Sat Sep 17, 2011 3:56 pm
by Petitlu
that made BANG as a shot but my video camera has an attenuator of sound…
Posted: Sat Sep 17, 2011 4:01 pm
by Mimikool
We are several to notice that, but his don't see anything ^^
I think the chamber is enormous compared to barrel, and 120 inclue much air, it's longer to leave barrel.
Posted: Sat Sep 17, 2011 4:07 pm
by Petitlu
The room made 0.47L, the gun 14mm int and 100cm length thus a volume of 0.154L
I know that there is much air but it is desired
Posted: Sat Sep 17, 2011 7:57 pm
by Crna Legija
Petitlu wrote:The room made 0.47L, the gun 14mm int and 100cm length thus a volume of 0.154L
I know that there is much air but it is desired
If you can handle the extra length, get a longer barrel you 250cm would make it a lot more powerful and a little bit quieter.
Posted: Sun Sep 18, 2011 2:43 am
by Petitlu
heuuu….
250cm it is very long nevertheless and thus not practices to draw and transport
Posted: Sun Sep 18, 2011 6:18 am
by Brian the brain
I should have known..
The damage and recoil are both very impressive.
Posted: Sun Sep 18, 2011 6:36 am
by Petitlu
Yes and I give a death rattle bad weather, can be that in the end of the day I will be able to make my shootings...
Posted: Sun Sep 18, 2011 12:36 pm
by Petitlu
composition of the target:
0.75mm steel
15mm wood
0.75mm steel
10mm wood
20mm mosse
5mm wood
the ball very crossed
video :
[/url]
Posted: Wed Sep 21, 2011 2:28 pm
by Petitlu
hi
Shootings with 200 bar (3000psi) with gun of 16mm and 12mm and a new reserve of 0.2L:
crossed target!
<iframe></iframe>
Posted: Thu Sep 29, 2011 3:17 am
by Petitlu
hello
I have just put a rifled bore gauges .50 on my CAP and I am very satisfied
shooting with 140 bar:
