Posted: Tue Apr 17, 2012 5:30 am
Ah bah c'est bien ça Petitlu, ca sera plus solide et durable que ma solution à l'epoxy 
Merci !
Tu parles français ?
Page 24 of 61
Posted: Tue Apr 17, 2012 5:32 am
Posted: Tue Apr 17, 2012 6:16 am
Visiblement oui! mais tu le savais déjà, je t'avais écris par MP pour ton allumage. (Je suis du Val d'Oise) Et je suis inscrit sur le forum francais depuis quelques années.
Posted: Tue Apr 17, 2012 6:17 am
BOOOOOOO!!!!CpTn_lAw wrote:ca sera plus solide et durable que ma solution à l'epoxy
But yeah, if your soldering is good enough, brilliant
are you going to sleeve another pipe inside the copper though?Posted: Tue Apr 17, 2012 6:29 am
Damn, Petitlu works fast. No wonder this thread is 24 pages long.
Posted: Tue Apr 17, 2012 6:30 am
I make Solder connections that withstand 150 bar!
My solders are strong
http://patator.frbb.net/t9788p30-culass ... ht=culasse
EDIT : copper is the 14/12mm, I'll call the projectile here so no other tube inside
My solders are strong
http://patator.frbb.net/t9788p30-culass ... ht=culasse
EDIT : copper is the 14/12mm, I'll call the projectile here so no other tube inside
Posted: Tue Apr 17, 2012 11:44 am
Bought a number/letter punch, had some fun with it something for future archeologists (or the forensic team...) to ponder over hehe
Will post the plug, sabots and fins tomorrow, looking forward to see what you do with them
something for future archeologists (or the forensic team...) to ponder over hehe Will post the plug, sabots and fins tomorrow, looking forward to see what you do with them
Posted: Tue Apr 17, 2012 11:48 am
very nice work
really looking forward to seeing the results of this gun!
really looking forward to seeing the results of this gun!
Posted: Tue Apr 17, 2012 12:01 pm
Hehe!
Thank you for everything you have sent me!
You are a leader!
Super engravings!
Surely as I receive your package and tungsten round at the same time.
I can not wait!
This after noon, I made the muzzle brake to the barrel diameter is 12.1mm!
For now it is simply glued
I tested the alignment with aluminum projectiles and with the dart, no problem!
EDIT : Thank you Labtecpower !
Thank you for everything you have sent me!
You are a leader!
Super engravings!
Surely as I receive your package and tungsten round at the same time.
I can not wait!
This after noon, I made the muzzle brake to the barrel diameter is 12.1mm!
For now it is simply glued
I tested the alignment with aluminum projectiles and with the dart, no problem!
EDIT : Thank you Labtecpower !
Posted: Tue Apr 17, 2012 12:43 pm
Nice I would normally suggest making a silencer instead, but for reasons I still can't explain you don't seem to need one.
I would normally suggest making a silencer instead, but for reasons I still can't explain you don't seem to need one.Posted: Tue Apr 17, 2012 12:50 pm
Thank you!
It is a hybrid furtive!
But I do not like the silencer long as they are generally ...
It is a hybrid furtive!
But I do not like the silencer long as they are generally ...
Posted: Tue Apr 17, 2012 12:55 pm
hehe I think you meant "stealth hybrid"
A silencer doesn't have to add much length, it could be of the reflex type:
A silencer doesn't have to add much length, it could be of the reflex type:
Posted: Tue Apr 17, 2012 1:01 pm
yes! hybrid stealth!
ok for the silent but evident not to make one that works well ...
ok for the silent but evident not to make one that works well ...
Posted: Tue Apr 17, 2012 3:47 pm
Now you can put someone's name on your bulletsBought a number/letter punch, had some fun with it
Posted: Tue Apr 17, 2012 3:49 pm
style ....Poland_Spud !