SpudFiles

RJB INDUSTRIES wrote:I can easly get high mixes with H2, see my topic

Not saying it can't be done, personally I prefer syringe injection at atmospheric pressure but manometric metering is of course possible.

butane / propane works very well, so I do not see the advantages of H2

The burn rate of H2 is incomparably bigger than the butane´s is.

2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(g) + energy that is lower than the powerful H2 combustion:
2 H2(g) + O2(g) → 2 H2O(l) + 572 kJ (286 kJ/mol)

H2 is the future....



RJB INDUSTRIES

but the future is pricey ..
the Thorjack is my first hybrid, so I started and butane enough.
In addition I make a Mix200!

mix200 with butane? What were the results?


RJB INDUSTRIES

He hasn't tried 200x yet.

Considering Petitlu is using butane/propane instead of <s>propane or</s> MAPP gas, I doubt he is too concerned with using a better fuel in his hybrid like H2.

edit: see below

This is an not finished project, here is the link:
http://www.spudfiles.com/forums/p-mix200-t24132.html

I use a butane / propane
The MAPP is not more powerful ....

MrCrowley wrote:Considering Petitlu is using butane instead of propane or MAPP gas, I doubt he is too concerned with using a better fuel in his hybrid like H2.

Actually he's using a butane/propane mix which seems to be the norm for "camping gas" in Europe.

yes !
can also have as butane !

That´s our camping gas....
I want build a 20 mix H2 air and see how it goes....


RJB INDUSTRIES

you need good materials strong

Yes I will weld this time, not couple pieces


RJB INDUSTRIES

I attacked the Thorjack look, I made the sliding guides of the barrel, the handle being fixed over and above the firing handle.
The interuptor by side is a security, with the thumb on the scale interuptor and we are ready to shoot!

Just saying

I thought this switch but they are pricey and too big!