SpudFiles

Make it manual, it´s much more reliable, can the rof is not different than a semi

its still better then the vss since it's semi auto

VSS is semi auto and full auto

6 mm bb's mine are yellow

you see ? it's airsoft
I'd say go for a hop up unit

POLAND_SPUD wrote:

its still better then the vss since it's semi auto

VSS is semi auto and full auto

Not the subject of this thread

you see ? it's airsoft
I'd say go for a hop up unit

Kuba showed it could be done, certainly.

Unfortunately in the countries where airsoft guns are illegal or require a license, one tends to either not have them or not want to cut them up.

ohh yeah I forgot about kuba

[youtube][/youtube]
Notice that if he hadn't been aiming at keeping the exactly the same dimensions as the original gun he could have used the 3 way as the only valve


That would make a pretty cool plinker...
with a reg you might be able to use it at 1 bar or so for airsoft and 10 for other targets

@ poland_spud i think your talking about the VSS 'Vintorez' silenced sniper rifle


and airsoft is illegal in the Netherlands which is strange cause airguns are legal if they dont look like real once which is the problem with airsoft so i can get them from a friend when he goes to Belgium but i dont have parts

the mag is from a bbgun from the local fair but i could blow harder than that thing so i took it apart for the parts only mag was usable

the are having a sale at my hardware retailer this Friday so i will get the parts for it then and the slide valve is on its way any suggestions for a new name?

@ poland_spud i think your talking about the VSS 'Vintorez' silenced sniper rifle

yeah, that's what I meant... wasn't that what you meant ?

and airsoft is illegal in the Netherlands which is strange cause airguns are legal if they dont look like real once which is the problem with airsoft so i can get them from a friend when he goes to Belgium but i dont have parts

well you could either get the hop up unit and a suitable magazine magazine or make your own

POLAND_SPUD wrote:

@ poland_spud i think your talking about the VSS 'Vintorez' silenced sniper rifle

yeah, that's what I meant... wasn't that what you meant ?

and airsoft is illegal in the Netherlands which is strange cause airguns are legal if they dont look like real once which is the problem with airsoft so i can get them from a friend when he goes to Belgium but i dont have parts

well you could either get the hop up unit and a suitable magazine magazine or make your own

no the second stage of my gun with the big barrel looked like it so i named it after it and does someone know how to make a detent?

streetfire wrote:does someone know how to make a detent?

As explained elsewhere, you basically need to sandwich a suitably sided o-ring in a threaded fitting at the breech end of the barrel.

jackssmirkingrevenge wrote:

streetfire wrote:does someone know how to make a detent?

As explained elsewhere, you basically need to sandwich a suitably sided o-ring in a threaded fitting at the breech end of the barrel.

simple but effective but there are no fittings for 8 mm aluminium barrel so i will check another option.

Just put a nipple over the barrel, I found that a drilled out 1/4" nipple fit over my ~8mm tube.

Gun Freak wrote:Just put a nipple over the barrel, I found that a drilled out 1/4" nipple fit over my ~8mm tube.

will try that but i dont think they have them at my local hardware store smallest is 10 mm probably just epoxy it to something i can use 3/8 or something

the slide valve is in and the back part of the gun is nearly completed fill valve is missing

legal bump? to get your attention

hadn't seen this, coming along nicely the firing chamber should be pretty small for a useful number of shots though.

Depends if he resorts to using BBs. With a small firing chamber I would expect quite a few usefull shots.