Page 4 of 6
Posted: Sun Jul 24, 2011 7:01 pm
by JDP12
Very nice video and rifle!!
Posted: Mon Jul 25, 2011 5:36 am
by LovableAirGuns
warhead052 wrote:LovableAirGuns wrote:
wyz, think you can draw up a diagram of how your trigger and hammer work?
try this and check his youtube channel becuase he has a pretty good hammer valve rifle
:
What I meant was more how does the entire thing function. Pretty much a cutaway of the entire trigger + hammer + impact point on the blowgun.
Try this it is very simple, i tried to build one but i gave up on mine because it came to fiddly and everything kept braking lol hhaha
Link:
http://www.airgunforum.ca/forums/topic29999.html
Posted: Mon Jul 25, 2011 6:44 am
by far_cry
this thing will never work
Posted: Mon Jul 25, 2011 6:54 am
by jackssmirkingrevenge
far_cry wrote:this thing will never work
It will work, but it's not really a hammer valve, rather a mechanically actuated exhaust valve.
Posted: Mon Jul 25, 2011 7:12 am
by LovableAirGuns
1st picture of the crossman on the website is a good example.
Posted: Wed Jul 27, 2011 12:16 pm
by wyz2285
Ok here is a diagram, sorry about the painting, but I think you can understand it
there is really nothing complicate at all.
(it´s not on scale)
Posted: Thu Jul 28, 2011 4:22 am
by ilovefire
do you know the diameter of the valve part of the blow gun? like where the pressure acts? cheers
Posted: Thu Jul 28, 2011 4:47 am
by wyz2285
you mean the impact point between valve and the hammer? or the holes that the air pass though chamber to valve to barrel?
Posted: Thu Jul 28, 2011 4:52 am
by ilovefire
the diameter of the the valve core where the pressure acts
Posted: Thu Jul 28, 2011 4:58 am
by wyz2285
8mm, you mean the part inside the valve that seales right?
Posted: Thu Jul 28, 2011 5:06 am
by Crna Legija
i think he mean the part in the red in the pic below
Posted: Thu Jul 28, 2011 5:12 am
by wyz2285
Ok that what I thought, yes that 8mm in dia
good air flow actually
Posted: Thu Jul 28, 2011 5:27 am
by ilovefire
ah ok thanks, i think mine is about 10mm, wasnt sure if mine was to big for a decent sized spring/hammer to open, but i guess if you can get the 8mm one to work with twice the pressure i guess it shouldnt be to hard
Posted: Thu Jul 28, 2011 8:08 am
by wyz2285
you will be fine
But i´m try to make a hammer valve that take 1000 psi but easy enough to be opened by a relatively weak spring
design/tip will be appreciated
Posted: Thu Jul 28, 2011 9:08 am
by warhead052
Thanks for the diagram. I may try and make my own at some point, but not for a while...