Posted: Mon Jul 08, 2013 9:57 pm
Can't see nothin. Hey man start editing your posts instead of doing another one. It clogs the forum...
Page 4 of 6
Posted: Mon Jul 08, 2013 11:07 pm
i edit it and u no answer O,O
Posted: Tue Jul 09, 2013 8:03 am
Hmmm...isnotaustin wrote:can u guys see those links????^^^^^ edit i got it to work and ill try to stop lmao and this is an easier way to explain it but its a alot of fittings and stuff mostly brass and the idea of this project is to make an ak-47 style super awesome vortex block airgun ... will an vortex block work ok with a qev at automatic popping?
anarchy08 had used a cloud chamber as a magazine in his semi-auto:
http://www.spudfiles.com/forums/anarchy ... 23302.html
popping small volumes at a high ROF, I don´t know how well it would work. Lots of dead space if you're just pulsing air.
Posted: Tue Jul 09, 2013 12:08 pm
Whats your opinion on what type of mag i should use for this
Posted: Tue Jul 09, 2013 8:10 pm
Gravity fed or breech load.
Posted: Wed Jul 10, 2013 11:40 am
I have an old airsoft gun ak that the mag still connects but its only 30round and would you guys say gravity is good enough?
Posted: Wed Jul 10, 2013 8:09 pm
I already did...
How is you airsoft gun relevant?
How is you airsoft gun relevant?
Posted: Wed Jul 10, 2013 8:12 pm
Its all right ... A little full metal gearbox ak and pretty heavy from the metal and plastic that is wood looking and it cost me 140 or somethin ... 350 fps with .20 and was pretty fast fireing
Posted: Wed Jul 10, 2013 8:15 pm
Suggest i do gravity? Or the mag becuase im not really sure witch i shoud do ... Itd be pretty easy to make it semi
Posted: Thu Jul 11, 2013 1:53 am
[youtube][/youtube]
[youtube][/youtube]
[youtube][/youtube]
Posted: Thu Jul 11, 2013 9:13 am
Im impressed for gravity but still , what do u guys suggest
Posted: Fri Jul 12, 2013 12:11 am
Are you not reading what Gun Freak's writing? 
I would also suggest gravity.
I would also suggest gravity.
Posted: Fri Jul 12, 2013 2:50 pm
ok so am i going to be able to just put it together or will i have to modify the qev in any way?.... what way do i modify it?
Posted: Mon Jul 15, 2013 2:30 am
Guys? Any help for me 
edit - a few parts just came in today and here is what my qev consists of
edit - a few parts just came in today and here is what my qev consists ofPosted: Mon Jul 15, 2013 12:57 pm
No modifications needed unless you want to reinforce the piston with a metal washer or something like that. But you should be fine without that. All you need to add is a pilot valve.