Pressure rated DWV?

[Fnord]

Tee

Elbow

I'm not sure if this will help, have a look anyway.

It would be a lot easier if I knew where you were ordering from.

[spudthug]

modder ur 2nd to last and last ones are wrong.. how am i going to use fittings for a spigot.. or threaded ones.. unless u can thread in fittings from the back..

[praetorian91]

His 2nd to last one is wrong, but the rest are solid. In fact, he has pointed all the parts you need. Just proves my point about McMaster having everything if you look hard enough.

Heres my tip: If you ever want to get the cannon done, follow those links and buy from McMaster. "Expensive" though it may be.

[spudthug]

His 2nd to last one is wrong, but the rest are solid. In fact, he has pointed all the parts you need. Just proves my point about McMaster having everything if you look hard enough.

no..it proves nothing..because the parts arent all there.. and the last one is wrong to.. there is two choices there and they both say spigot..

EDIT:

i have a new plan..well new parts.. instead of another cap and male adapter i am going to use a sch 80 plug..

i need-

4" elbow
4" tee
4" cap
4" female adapter
4" sch 80 cap
4"x2" reducing bushing

[Modderxtrordanare]

His 2nd to last one is wrong, but the rest are solid. In fact, he has pointed all the parts you need. Just proves my point about McMaster having everything if you look hard enough.

no..it proves nothing..because the parts arent all there.. and the last one is wrong to.. there is two choices there and they both say spigot..

EDIT:

i have a new plan..well new parts.. instead of another cap and male adapter i am going to use a sch 80 plug..

i need-

4" elbow
4" tee
4" cap
4" female adapter
4" sch 80 cap
4"x2" reducing bushing

The parts are all there, spigot means it's the same diameter as a piece of pipe. It will fit right into the socket of your tee.

Every part I just listed would work for you, the second to last one is CPVC, so what?

[spudthug]

no the 2nd to last one is a 2 inch male adapter...

[Modderxtrordanare]

no the 2nd to last one is a 2 inch male adapter...

My mistake.

#4596K863

There ya go.

[praetorian91]

Now your just splitting hairs...

Aside from that, yes everything is there, and yes my point has been proven.

If you use your brain, everything is there. Even the 4 inch male adapter, which can be found on the page he listed as the "female adapter page".

EVERYTHING IS THERE!

Edit: Modder fixed the part number, and has basically outlined where you can find the parts you need. Thats a big help he has given you.

[Modderxtrordanare]

Now your just splitting hairs...

Aside from that, yes everything is there, and yes my point has been proven.

If you use your brain, everything is there. Even the 4 inch male adapter, which can be found on the page he listed as the "female adapter page".

EVERYTHING IS THERE!

Edit: Modder fixed the part number, and has basically outlined where you can find the parts you need. Thats a big help he has given you.

I try to be a big help. Thank you. But I've pretty much exhausted any help I can give. He just doesn't want to accept it because he has some sort of grudge against me.

[Modderxtrordanare]

i wonder why i have a grudge against you...did you ever ask yourself why i have a grudge on you? yeah..u know why..

Because you don't like the truth?


You've been given every part you asked for. If you "had them already" then why did you say that you couldn't find any of the parts you needed on McMaster eh?

[frankrede]

check for a local irrigation supply store for larg diameter pipes and fittings at lower prices and a larger selection. I suggest looking for a Ewings