Posted: Fri Mar 25, 2011 3:45 pm
couldn't he cross-compile?
Page 32 of 443
Posted: Fri Mar 25, 2011 5:23 pm
This doesnt seem right... seems rather optimistic. Did I put in a wrong spec?
Posted: Fri Mar 25, 2011 6:10 pm
it dose when compared to the last one, but it its correct then i think i might start making one strait away 
the only thing i see that is different is the pilot volume on this one is 1cm3 on the other one you had 5cm3, could that really affect it that much? wait i just checked again and you have got the projectile mass as .5 in the faster one and 25 in the slower one, i looked it up and i think they are about 2 grams each
the only thing i see that is different is the pilot volume on this one is 1cm3 on the other one you had 5cm3, could that really affect it that much? wait i just checked again and you have got the projectile mass as .5 in the faster one and 25 in the slower one, i looked it up and i think they are about 2 grams eachPosted: Fri Mar 25, 2011 7:08 pm
Changing the pilot volume never does anything significant, it must be the weight. I looked up the pellets but they are different weights, and I didn't know what kind you were using. I'll try it with 2 grams and tell you the results.
191 meters per second/627 fps with 2 gram pellet.
191 meters per second/627 fps with 2 gram pellet.
Posted: Fri Mar 25, 2011 7:28 pm
thanks, its no 300ms but i think that is a reasonable speed and am sure it would be able to do some damage by the way i am planing on using these
http://cgi.ebay.com/25-8mm-Chrome-steel ... 2103wt_965
by the way i am planing on using these http://cgi.ebay.com/25-8mm-Chrome-steel ... 2103wt_965
Posted: Fri Mar 25, 2011 8:03 pm
Sounds good, glad I could help.
Posted: Sat Mar 26, 2011 12:09 am
bought most of the stuff today going to start building it this afternoon and will be getting the piston by monday so i should be done before next weekendGun Freak wrote:Sounds good, glad I could help.
cheers againPosted: Sat Mar 26, 2011 12:58 pm
Awesome... can't wait to see it 
What will the piston be?
What will the piston be?Posted: Sat Mar 26, 2011 5:50 pm
iv epoxied all the valves in the back and got the barrel ready to be glued in i just need to get some rubber for the solid rubber piston, just about to check if theres anything in the shed now, if not ill have to wait till tomorrow for the piston, if all goes well it should be shooting be tuesday or wednesdayGun Freak wrote:Awesome... can't wait to see it
Posted: Sat Mar 26, 2011 10:03 pm
Sounds great... Also sounds like it would be awesome with a wood stock... 
Posted: Sun Mar 27, 2011 2:48 am
ha ha yes well i do plan to make one after iv got it all finished and working
Posted: Sun Mar 27, 2011 3:30 am
I hate to pull a wanna-be mod card, but this the offtopic-topic.
Get back off topic please.
There should be an "ontopic-topic".
Get back off topic please.
There should be an "ontopic-topic".
Posted: Sun Mar 27, 2011 3:46 am
want to see my fish then?
Posted: Sun Mar 27, 2011 10:02 am
YES! What kind of fish 8)
Posted: Sun Mar 27, 2011 10:06 am
There isZeus wrote:There should be an "ontopic-topic".
Back off topic, this is one for the older generations as most teenagers on this forum won't remember these devices, spoilt as they are with their mobile phones and PSPs...
Retro Handheld Games.