Page 39 of 74
Posted: Thu Dec 06, 2012 1:07 pm
by PaperNinja
How long would it take? It's pretty standard, I can't imagine it would take too long right?
Posted: Thu Dec 06, 2012 1:40 pm
by jrrdw
To set up a lathe? Depends on what the last job was. Might have to change the bit and or all the settings...Depends on others things like type of gear box, how many jobs ahead of you.
It best to use a pipe threader, all ready set up for that work. Easy adjustments etc...
Posted: Sat Dec 15, 2012 2:41 am
by evilvet
Evening all
Made some changes to the CNC router that might be of interest to those on DIY machining paths.
Regards
http://www.youtube.com/watch?v=judr2tX8 ... e=youtu.be
Posted: Sat Dec 15, 2012 2:54 am
by Lockednloaded
I'm looking to get a muzzle adaptor machined for my crosman 2240, it basically needs to be a 5/8" diameter adapter with a 7/16" hole on one end with a small set screw and a 1/8" NPT female port on the other. I was wondering if any US machinist could do this for cheap with any scrap metal or plastic they have around the shop. I can post I diagram, but it's pretty simple and I'm looking for a price quote first.
Posted: Sat Dec 15, 2012 5:21 am
by jackssmirkingrevenge
I could do it in brass for $15 posted if you don't get a better offer.
Posted: Sat Dec 15, 2012 2:48 pm
by jrrdw
jackssmirkingrevenge wrote:I could do it in brass for $15 posted if you don't get a better offer.
Shipping will only be $150 to the US! It cost a few extra bucks to get the submarine to surface...
Posted: Sun Dec 16, 2012 3:10 am
by Lockednloaded
jackssmirkingrevenge wrote:I could do it in brass for $15 posted if you don't get a better offer.
I'm in Texas, so I'd assume shipping rates from wherever you live (assuming europe area) may be pretty high, any estimate on postage for such a small item internationally?
Posted: Sun Dec 16, 2012 3:53 am
by jackssmirkingrevenge
Yes jrrdw
Lockednloaded wrote:I'm in Texas, so I'd assume shipping rates from wherever you live (assuming europe area) may be pretty high, any estimate on postage for such a small item internationally?
Quote for $15 includes shipping.
Posted: Sun Dec 16, 2012 6:36 am
by jrrdw
http://static3.fjcdn.com/comments/relax ... 0421fc.png
"URL's" don't work with img tags. $15 shipped? Merry Christmas LnL!
Posted: Sun Dec 16, 2012 5:43 pm
by jackssmirkingrevenge
here you go LnL, will post tomorrow.
Posted: Sun Dec 16, 2012 6:22 pm
by jakethebeast
Hey anyone know where i can find a DOM steel pipe or SS pipe thats has smooth, 9.90mm to 9.97mm inside? I need like 1m piece... Also i need a receiver pipe. Also smooth inside, should be 32mm (ID). Could be steel, SS or aluminium. Wall thickness needs to be at least 2mm...
My hybrid project has lasted far too long, need to get it finished...
Posted: Thu Dec 20, 2012 1:12 am
by MMNDGaming
Who can make a pen gun that can hold 300 psi safely, if it can be made out of carbon fiber it would be better, it has to be 4.5mm caliber
how much would that cost shipped to mexico?
Posted: Wed Jan 09, 2013 3:43 pm
by jsefcik
Need a machinist who is in usa nd would like to do some work for me !! Need a piston machined,, I dont know if you need the valve to do it ,, the sealing face is 1 1/2 nd housing is two inch ,, I have pics for exactly what I want ,, let me know if your interested in making some cash !!
Posted: Wed Jan 09, 2013 3:51 pm
by jrrdw
It definitely helps to have the valve, that way the piston can be custom fit. What do you want it made from?
Posted: Wed Jan 09, 2013 4:03 pm
by jsefcik
jrrdw wrote:It definitely helps to have the valve, that way the piston can be custom fit. What do you want it made from?
Solid pvc perferably with a good rubber sealing face ,, I could send the valve if needed