Posted: Thu May 03, 2012 5:03 pm
last vidéo :
[youtube][/youtube]
[youtube][/youtube]
Page 41 of 61
Posted: Thu May 03, 2012 6:08 pm
Impressive
Posted: Thu May 03, 2012 11:54 pm
Very nice 
As al-xg was saying, a heavier slower projectile might be the ticket. It will be less likely to shatter while still having the sectional density to penetrate.
As al-xg was saying, a heavier slower projectile might be the ticket. It will be less likely to shatter while still having the sectional density to penetrate.
Posted: Fri May 04, 2012 6:39 am
I have a question, research is difficult because of the language ...
Spudfiles on, there are many who shoot hybrid Mix40 or more? (except larda)
I'd love to see them
Spudfiles on, there are many who shoot hybrid Mix40 or more? (except larda)
I'd love to see them
Posted: Fri May 04, 2012 7:10 am
Most people seem to have maxed out at 20-30x. Personally I've gone up to 28x maximum, because that's the most you can get using butane/propane at atmospheric pressure.
Posted: Fri May 04, 2012 7:21 am
I'm not aware of anyone currently using over 30X, save for Petitlu (Larda's been preoccupied with a pulse jet powered snowmobile for a while). I'll likely exceed 40X with my testing this summer, but that's all small scale indoor stuff. Mobile Chernobyl is interested in doing a high pressure hybrid, but he's been on about that for years now... 
Posted: Fri May 04, 2012 7:29 am
" I'll likely exceed 40X " with hybrid or other ?
there were no hybrid Mix40, small caliber made of Spud?
EDIT :
IPN :
there were no hybrid Mix40, small caliber made of Spud?
EDIT :
IPN :
Posted: Fri May 04, 2012 8:35 am
That makes you second to LardaPetitlu wrote:there were no hybrid Mix40, small caliber made of Spud?
And that's a thoroughly abused beam you got there
had you tried the 8mm ball bearing in the sabot?Posted: Fri May 04, 2012 8:41 am
My next test will be shooting with ball 8mm steel and tungsten rod.
I will try récupurer tungsten:
after passing through the metal rod will go in a plexiglass aquarium!
All filmed at 60fps with a EOS7D
"That makes you second to Larda"
this makes us second to Larda
I will try récupurer tungsten:
after passing through the metal rod will go in a plexiglass aquarium!
All filmed at 60fps with a EOS7D
"That makes you second to Larda"
this makes us second to Larda
Posted: Fri May 04, 2012 10:04 am
Full of water I hopePetitlu wrote:after passing through the metal rod will go in a plexiglass aquarium!
Glad to be a part of itthis makes us second to Larda
Posted: Fri May 04, 2012 11:50 am
yes, full of water! and I even want to put a red fish!
Without you I have had difficulty make a hybrid ...
Without you I have had difficulty make a hybrid ...
Posted: Fri May 04, 2012 4:01 pm
I thought about the shots of concrete nail.
the first was different from the second
the first was different from the second
Posted: Fri May 04, 2012 4:04 pm
Is the fin you used for the first shot number 3 from left in this picture?
That might have been too flimsy, I went a bit overboard with the milling... I would believe that it broke up in the barrel.
That might have been too flimsy, I went a bit overboard with the milling... I would believe that it broke up in the barrel.
Posted: Fri May 04, 2012 4:11 pm
No, first shot:
second from the left
second shot:
first from the left
EDIT :
The mix was different too, but I think the angle of fire played a lot in the result
second from the left
second shot:
first from the left
EDIT :
The mix was different too, but I think the angle of fire played a lot in the result
Posted: Fri May 04, 2012 4:49 pm
Right. Still a bit of a mystery though, from a lower mix I would expect a shallower hole but still not the side-on mark imprinted on the beam from that shot.