Short question topic

[sharpshooter11000]

Ok, thanks for your help

[wyz2285]

Anybody knows what type of quick connection fitting does a paintball tank uses? I have a paintball tank with a regulator and a remote line with a quick connection on it, now I need another quick connection to connect the remote line to my gun. Thx

[Mr.Tallahassee]

Just go online. There are a bunch of them for relatively cheap. (Super long url)

[mobile chernobyl]

something like this for $5?

http://www.e-paintball.com/32-degrees-q ... nnect.html

This one doesn't look like it - but sometimes they are proprietary machined parts. At the price - if it's compatible it's hard to beat.

[wyz2285]

I think yes, but I only need the female part(the small part, don´t know what´s the name of it )
didn´t find anyone in ebay that sells to Portugal

[mobile chernobyl]

Well just move to 'Merica then, problem solved!

[wyz2285]

that´s a long term solution but a need one fast

[Goats spudz]

Does any one know what size arc welding rod to use for black mild steel the kind used in gates (im making a stock for my G3 airgun)

wyz: there called female paintball QD couplings

[mobile chernobyl]

3/32 or 1/8 E6011 rod should do. 6011 is kinda the jack of all trades for dirty steel. Depending on the thickness of your material you'll have to choose the diameter of the welding rods - this you did not specify.

[Goats spudz]

the thickness of the material is 2cm and i have 2.5mm rods i think they will work?

[mobile chernobyl]

Speak In Ingrish! lol Jk, but really - a lot of standards were based off the imperial system when it comes to welding, so your 2.5mm rods would equate to the 3/32 rods we have here. For 2cm, which is again, roughly 3/4 of an inch - a 3/32 rod for that would be typically considered undersized. Will it work? Yes it could be made to work if your just concerned about getting part A to stick to part B. For a proper weld penetration, you'd most likely want something north of 1/8" so you can flow more current though it before it hits its melting point, allowing for more weld penetration.

[wyz2285]

Thx Guats, so can somebody send me a link where I can buy some paintball female QD couplings with threads of 1/4 ?

[Gun Freak]

I think all the paintball stuff has the same threads, 1/8". I don't think there is such a thing as 1/4" paintball thread.

[mobile chernobyl]

Nope, not unless you go back to the 90's and mayyyybe early 2000's era of paintball, but it's more likely you'd find that in the 90's which means you wont find it now.

[Goats spudz]

Thx Guats, so can somebody send me a link where I can buy some paintball female QD couplings with threads of 1/4 ?

http://www.seapearls.com/paintball/fema ... ipple.html

use this page to find the store where u live http://www.seapearls.com/dealer_locator.html