Page 7 of 12
Posted: Thu Nov 03, 2011 4:11 am
by wyz2285
I know, I have already printed your diagram dewey-1, as soon as I get all the parts I will start making it. Could you teach me how to adjust the fire rate? Ps: I have to mod the valve again, apparently the 12v battery I bought isn't as strong as a car battery
Posted: Thu Nov 03, 2011 5:35 am
by Goats spudz
wyz2285 wrote:I know, I have already printed your diagram dewey-1, as soon as I get all the parts I will start making it. Could you teach me how to adjust the fire rate? Ps: I have to mod the valve again, apparently the 12v battery I bought isn't as strong as a car battery
run more batteries in parallel or use a weaker spring?
Posted: Thu Nov 03, 2011 5:44 am
by wyz2285
weaker spring, of course.
The battery pack is already big and expensive. Btw dewey-1 thanks for the link
Posted: Thu Nov 03, 2011 5:57 am
by Goats spudz
wyz2285 wrote:weaker spring, of course.
The battery pack is already big and expensive. Btw dewey-1 thanks for the link
Agreed!
Posted: Thu Nov 03, 2011 7:41 am
by dewey-1
wyz2285 wrote:I know, I have already printed your diagram dewey-1
Ps: I have to mod the valve again, apparently the 12v battery I bought isn't as strong as a car battery
Make sure to print the one with the comments on it. Not the early one I posted.
What type is the battery? Picture and/or link please.
Posted: Thu Nov 03, 2011 9:25 am
by wyz2285
1.2v cell connected into two 6v packs, then connect them into a 12v pack, 1000mAh only sadly
Posted: Thu Nov 03, 2011 12:48 pm
by dewey-1
Are those NiCd AA size cells or something else. A link will help me solve the problem.
I know NiCd sub C size will work.
Posted: Thu Nov 03, 2011 12:57 pm
by wyz2285
Yes they are Ni-Cd AA cells, well I would post a link buy I bought them from a local electronic store
and they this type is all they had, hope they works
And well... is burst fire possible without complicating too much? Sorry I know I had said that it´s not useful but I found out that a lot AEGs have that option
Posted: Thu Nov 03, 2011 1:11 pm
by dewey-1
If they are Ni-Cd they should work OK.
Is there any part/model number on the battery?
There usually is for identification purposes.
Posted: Thu Nov 03, 2011 1:16 pm
by wyz2285
I think not... I bought these cells individually then packed them.
camelion Ni-cd 1.2v AA 1000mah, that´s it
Posted: Thu Nov 03, 2011 1:43 pm
by dewey-1
Posted: Thu Nov 03, 2011 1:52 pm
by wyz2285
Looks like yes
but my are cheaper
How mony shots will they make more or less?
Posted: Thu Nov 03, 2011 2:22 pm
by POLAND_SPUD
is burst fire possible without complicating too much? Sorry I know I had said that it´s not useful but I found out that a lot AEGs have that option
it is possible... though do you have a loading mech on that ?? if you don't then what's the point of adding that feature ??
It would be more practical to get an aeg (I assume you want it for airsoft ??). Seriously, you need an air chamber for that an as much batteries as you need for an AEG. So what's the point ?
Too be honest I don't like your design at all. Your using electricity to do what it does worst (I hope you get what I mean). This wouldn't be such a big deal if it was machined, as that would help to reduce friction, but it isn't. Lol I probably sound very negative.
Posted: Thu Nov 03, 2011 2:36 pm
by wyz2285
The valve stem is polished on a lathe first
low friction.
I want more power than a AEG, this valve+800psi
and a AEG needs more battery, my goal was a gun simular to baikal blackbird.
Again, this valve is
also the reloading mechanism, see the first diagram I posted.
(I bet you were very positive if I had used the 3-way+cylinder option
)
Original thread where I got the Idea
Posted: Thu Nov 03, 2011 4:27 pm
by POLAND_SPUD
I bet you were very positive if I had used the 3-way+cylinder option
Now you get it
nah really dude... solenoid 3 way valves do have a small solenoid inside - the only difference is that it is machined and a proven design that serves as a pilot valve for the main valve... so essentially you don't need much
electricity to open it