Page 7 of 7
Posted: Thu May 24, 2007 1:47 pm
by ShowNoMercy
Qualified with pistol, and yes I got qualified here and USMMA. We have an underground pistol range.
Posted: Thu May 24, 2007 1:49 pm
by goathunter
Qualified with a pistol.Rifles are easy.
Yep, the barrel should work perfect for proball.The last case I got was .686".
To bad you can't find PMI Premium anymore,that used to be the best.
Posted: Thu May 24, 2007 1:59 pm
by ShowNoMercy
Well I dont have much money and I think I have some of that cpvc laying around so I may try and rifle that stuff. Not sure how but whatever I do it will be an adeventure.
Posted: Thu May 24, 2007 3:03 pm
by paaiyan
There was a how-to on rifling pvc around here somewhere. Too lazy to find it at the moment but it shouldn't be too hard for you.
Posted: Thu May 31, 2007 7:09 pm
by Darkerweb12
@MrCrowley:Each paintball marker manufacturer has their own custom threads, so finding a match in off the shelf PVC is unlikly.
@ShowNoMercy: I suggest you just get a 3 or 4 foot section of 3/4" PVC, as said before, there may be other types of PVC that have ID's closer to .68"
And rifling or not will have no effect on accuracy, rifling does no good on a spherical projectile as spinning it will only cause it to fly off to the side, same principle of Hop-Up on an airsoft gun, but since you are spinning it perpendicularly to the axis of motion, the higher pressure will be on the side of the Paintball, causing it to be pushed off target.
In short, Rifling = BAD on PB/Airsoft guns.