real fast
Posted: Wed Jan 16, 2008 10:33 pm
may be a dumb questions but where is a good place to put my psi reader... i have an over under design... on the chamber?
Page 1 of 1
Posted: Wed Jan 16, 2008 10:36 pm
you mean pressure gauge? uh yeah that would be on the chamber facing your direction so you can see it.
Posted: Wed Jan 16, 2008 10:37 pm
Isn't this kinda just common sense?
do what elitesniper said
do what elitesniper said
Posted: Wed Jan 16, 2008 10:41 pm
In case it is over pressured, a pressure guage in the middle of the chamber "facing your direction" would probably shoot in your face.facing your direction
Screw and epoxy the guage in a elbow, generely a strong part with thick walls, MAKE SURE YOU ARE USING PRESSURE RATED PARTS.
Posted: Wed Jan 16, 2008 10:41 pm
yes sorry just wanted to double check... i love you
Posted: Wed Jan 16, 2008 10:44 pm
creeepy...
Posted: Wed Jan 16, 2008 10:46 pm
i meant in faceing you direction its the one that sticks out on the side so the gauge face is faceing your direction if it popped out it would pop out side ways not his face.
Posted: Wed Jan 16, 2008 10:52 pm
Fnord i love you too incase you were feeling left out
Posted: Thu Jan 17, 2008 5:47 am
All the love.
I put mine in a tee in the back of the launcher, instead of drilling through the elbow. If I can, I avoid drilling into the pieces of pipe. The gauge generally has 1/8"npt threads so finding a bushing shouldn't be that hard.
I put mine in a tee in the back of the launcher, instead of drilling through the elbow. If I can, I avoid drilling into the pieces of pipe. The gauge generally has 1/8"npt threads so finding a bushing shouldn't be that hard.