SpudFiles

Hey, I decided to finally finish my new TB Gun with the bolt action barrel integrated into the new design. I used my old 1.5" irritol valve but some dumbass decided to epoxy the old chamber to the valve which is where the butt design comes into play. The chamber as it is now hangs off of the lower inlet of the valve and is made from 2" sch 40 nsf-pw. The end cap on the chamber is equipped with a 1/4 npt to schrader fitting epoxied in place. The barrel is 2.5" sch 40 with an air through bolt breech loading system, with a spring in between the bolt and the backstop of the barrel for an auto breech close which explains why the bolt lock is at the rear of the slide. Any comments appreciated. One quick note, when i can find the correct adapter I'm going to enlarge the chamber to possibly a 3" diameter.

Pretty cool, nice job solving the "dumbass epoxy" thing, looks goods.

looks good, but moar bigger pics lol

Yeah definantly bigger pics, I just realized you couldn't click on them to make them bigger.

Sooooo, whens the video coming? <a href="http://plugin.smileycentral.com/http%25 ... /page.html" target="_blank"><img src="http://smileys.smileycentral.com/cat/14/14_6_12.gif" alt="SmileyCentral.com" border="0"><img border="0" src="http://plugin.smileycentral.com/http%25 ... e.gif"></a>

sweeeet looks like youd be able to get quite a bit of destuction from that beast although a barrel support may be good 8)

Jrrdw, whats with the emoticons on crack?. They're getting more interesting everytime you use a new one.