Higher Flow Regulator
Posted: Sun Feb 03, 2008 5:15 pm
details later
details later
Page 1 of 1
details later
Posted: Sun Feb 03, 2008 6:42 pm
Could you include a diagram wich clearly shows us how it all works?
Posted: Sun Feb 03, 2008 8:36 pm
Here it is when the incoming air pressure is at or below the predetermined setting.
And here it is when the pressure is too high and the regulator stops feeding air.
A set pressure is determined by how strong the spring is and how much surface area the piston has. I guess it can be adjusted by changing how far back the piston has to travel before it cuts off air.
And here it is when the pressure is too high and the regulator stops feeding air.
A set pressure is determined by how strong the spring is and how much surface area the piston has. I guess it can be adjusted by changing how far back the piston has to travel before it cuts off air.
Posted: Sun Feb 03, 2008 9:08 pm
Thats a good idea
Posted: Mon Feb 04, 2008 5:19 am
Hmm nice idea.
I think it should work, but you'll have to use O-rings to seal things off.
I think it should work, but you'll have to use O-rings to seal things off.
Posted: Mon Feb 04, 2008 8:23 pm
Oh yeah I will. If I ever build that semi-auto paintball gun, I'll use this regulator in the design.