SpudFiles

Hello everyone! Just a quick question i could not answer from a lot of research on the internet and on the forum.

Everyone here talks about McMaster Carr, wich i visited numerous times and found out that is it a wonderful site to get pneumatic launcher materials BUT :

They do not ship to Canada...

Is there any other site that could be compared to McMaster that ship their products to Canada? As some of you might know, it is impossible to find pressure rated tubing in most places in Canada. Sure we have copper, but it is terribly expensive in large size...

Thanks a bunch in advance!

Is there any other site that could be compared to McMaster that ship their products to Canada?

Nothing can compare to McMaster-Carr. It's where I get most of my rare spudding supplies, but the extra shipping costs and hassle for the "McMaster - Georgia - Muskoka - me" route can be annoying.

If you live in southern Ontario, Howell Pipe is your best bet. They have more plumbing and pipefitting supplies than McMaster-Carr by far, but they don't actually ship things, as far as I'm aware - you have to show up at one of their locations to pick up whatever you bought.

What exactly are you looking for? The welding shop in my town can order all sorts of tube, including the seamless 2" steel tube rated for 2500 psi that I'm using on my current project. Welding shops often have old scraps of pipe lying around that can be very useful. The one I go to has 4" SCH 40, 4" SCH 80, and 8" SCH 40 just sitting around rusting. They ordered 40' of 14" SCH 40 for someone, so they really do have good connections. No fittings from them, but a good welder can make perfectly useable and reasonably safe fittings with just pipe nipples, couplings, and steel plate.

Which province do you live in?

http://www.fastenal.com/

http://www.princessauto.com/PAcountry.c ... N&INF=home

http://www.metalsupermarkets.com/msc-st ... Code=63130

For those really challenging to find items,

http://www.cossd.com/

Use the search bar.

Most places will at least "hold for pickup" so that you can arrange for shipping. Others, will arrange for shipping if you ask.

I live in Quebec! French frog reporting in...

More precisly i am looking for brass treaded pipes and fittings for a c02 launcher. 1/2 inch and 3/4 inch. Pressure washer handle, specific springs, low viscosity epoxy and QEV. And probably a few more things for my next projects.

I could post the plans of what im working on, it's realy nothing special but if it could help i would be glad to share it.

And thanks for the input guys!

Pressure washer handle, some springs, should be fibreglass resin as well @ princess auto

QEV's @ fastenal

If you must have epoxy, try hobby shops that cater to model aircraft or use marine epoxy.

Thank you all, i'll look up those sites and start working!