Lack of qev's in Australia

[Mitchza89]

Ok this is starting to sh!t me. I'm having absolute bugger all luck finding one of the cylinder style qev's (the same sort that BTB uses) I really hate the parker phram' style qev's aswell as the ones mcmaster sell but hey....If I have to get one of those, then I'll have to get one of those.

Any other Aussies have the same problem?

[ALIHISGREAT]

What threads do you use? if its BSP i'd go over the the UKSGC.... i'm sure you could get one shipped across for a small fee.

[Mitchza89]

Yeah I'm after BSP. I'm into small bore (8mm usually) so a 3/8 or 1/2in should be fine.

[ALIHISGREAT]

Pm'd

message too short

[Mitchza89]

Thanks a hell of alot for that. Very much appreciated aye. I'll get onto em ASAP.

[Biopyro]

http://www.technobots.co.uk/acatalog/On ... s_147.html
Technobots do international shipping and are slightly less of a rip than the UKSGC shop. The owner is also very busy developing a new project so didn't have time to fill my recent order. Looks like spudding shops are taking a turn for the worse

[Mitchza89]

I've found that over the last 6 months, Spudfiles has taken a serious dive in posts, finished guns and general intrest....it's a bit sad really...

[Cosmic Muffin]

if spudfiles goes down we can start our own Aussie forum ay?
i heard there was a place in perth that sells em, cos i was talking to carlman, and he rekons you can get em there. if you live in WA that would be a good place to start i rekon.

[starman]

if spudfiles goes down we can start our own Aussie forum ay?
i heard there was a place in perth that sells em, cos i was talking to carlman, and he rekons you can get em there. if you live in WA that would be a good place to start i rekon.

Spudfiles isn't going down. It does have peaks and valleys of interest but it all averages out. I imagine the holidays are siphoning off some interest at the moment.

I have noticed somewhat of a drop in cannon postings lately. I wouldn't make much of it.

[Brian the brain]

Personally, ive had to put in a lot of overtime lately...

[Ragnarok]

I have noticed somewhat of a drop in cannon postings lately. I wouldn't make much of it.

I'm planning to do a cannon in the next few weeks. Next chance won't be until Easter, because that's the next let up in my Uni schedule, so I want to take the chance.

[cheeseboy]

its a bit late to answer the question but here is a good site for small size QEV's they are currently on sale and the store is based in queensland so the shipping won't be a ripoff

http://www.bellpro.net/xcart_program/home.php?cat=268

sorry for the late reply just found the topic

[sfinktah]

its a bit late to answer the question but here is a good site for small size QEV's they are currently on sale and the store is based in queensland so the shipping won't be a ripoff

http://www.bellpro.net/xcart_program/home.php?cat=268

sorry for the late reply just found the topic

Awesome, site is still up.. and yes, I'm bumping this old-as post on purpose.

[jrrdw]

"and yes, I'm bumping this old-as post on purpose."

And that purpose is?

[D_Hall]

Another thought... QEVs go by other names and the "QEV" nomenclature may simply not be used in Aussiland. It might be worth looking for "pulse" valves or "dust" valves. Those are (less popular) names for the same thing.