Page 1 of 1
break barrel discussion
Posted: Mon May 09, 2011 5:18 am
by Major Collins
on goathunters pneumatic named goat's gun .... what is used to lock the barrel into place i cant seem to work it out
Posted: Mon May 09, 2011 6:02 am
by MrCrowley
Friction by the looks of things...
Provide a link next time:
http://www.spudfiles.com/forums/goats-gun-t7779.html
Posted: Mon May 09, 2011 8:51 am
by Major Collins
hrmm i guess that but doesnt seem right eh
will do with the link providing next time
Posted: Mon May 09, 2011 8:58 am
by Crna Legija
if your going to shot light ammo like hes does its fine, as long as it don't jam.
Posted: Mon May 09, 2011 9:16 am
by Major Collins
i wanted to shoot 3/8 steel ball bearings , i was think they might be fine because there is no friction but the recoil might kick it open
Posted: Mon May 09, 2011 4:33 pm
by MrCrowley
Why don't you just think of a way to keep it closed? All you need is a bolt...
Posted: Mon May 09, 2011 4:44 pm
by mark.f
The coupler the barrel locks into is cut not at the halfway point, but slightly less, so that the coupler deforms when the barrel is pushed onto it, and then snaps into place over it.
Since forces are roughly inline with the barrel (not completely), the hinge should keep the barrel in place.