Page 1 of 1
2 inch qev/dust valve 6 available
Posted: Mon Sep 26, 2011 2:08 pm
by mattyzip77
I seen these bad boys today and at 40 bucks, you cant go wrong! Just imagine the possibilities and potential of this valve! I'm sure that with the right size chamber and barrel, one of these will put any piston valve on here to shame!! Check it out, theres 6 left!!
http://www.ebay.com/itm/MECAIR-DUST-COL ... 760wt_1270
Posted: Mon Sep 26, 2011 2:49 pm
by Alster370
Look promising, they are stated as 2 1/2 btw. Maybe a massive shoulder firing pneumatic can be your next project.
Posted: Mon Sep 26, 2011 2:59 pm
by mattyzip77
Yes, I seen that they are listed as 2 1/2 and 2 1/4, however if you look at the picture with the tape measurer, you can clearly see that it is a 2 inch port. It even comes with a solenoid!! I may get one for the hell of it. 8) 8)
Posted: Mon Sep 26, 2011 5:21 pm
by Gun Freak
65 bucks... pretty steep for a low pressure valve. Could build one better for less money.
Posted: Mon Sep 26, 2011 5:28 pm
by mattyzip77
We all know this will go well over the psi stated, and I would be willing to bet money that you could not!
Its 51 dollars to me shipped! If you have used a valve of this size you would beg to differ as well! I am not taking anything away from you, dont get me wrong. You do make a mean valve!!
Posted: Mon Sep 26, 2011 6:28 pm
by POLAND_SPUD
Posted: Mon Sep 26, 2011 6:36 pm
by mattyzip77
Thanks for the data sheet Poland Spud! I wonder what the actual retail is on one of these things? Must be rather pricey!! EDIT The price is 159 smackeroos retail!
Posted: Tue Sep 27, 2011 1:28 am
by Crna Legija
since it uses a diaphragm not a piston it probably wont take much more then its rated and half the fun is in making the valve.
Posted: Tue Sep 27, 2011 7:24 am
by jrrdw
Crna Legija wrote:since it uses a diaphragm not a piston it probably wont take much more then its rated and half the fun is in making the valve.
Just imagine all the aluminum foil burst disk you can make for the price of 1 QEV posted here.
Posted: Tue Sep 27, 2011 8:52 am
by POLAND_SPUD
well I guess it depends what you want
if you want a powerful one shot cannon then get a union instead
if you want a high ROF large bore cannon then this is ideal
Posted: Tue Sep 27, 2011 2:38 pm
by mattyzip77
I am just a big fan of big valves like this. Thought it may be a good deal for someone to jump on! Guess as always, wrong again!
Posted: Tue Sep 27, 2011 4:54 pm
by Gun Freak
wrong again!
As always
Posted: Tue Sep 27, 2011 5:01 pm
by mattyzip77
Gun Freak wrote:wrong again!
As always
Thank you sir, may I have another??? lol