2 new Guns. Rifle and Bazooka!
Posted: Fri Jul 13, 2012 5:05 pm
Gday All,
I just today joined the site and am a 1st time poster. I recently decided i would have a go at building an air gun. I Just found this site and am going to sift through the wealth of info on here.
Anyway i wanted to use parts at work and make something that could fire a readily available ammo. Marbles.. 100 for $1 at the Dollar Store.
I Built the rifle 1st and the Bazooka 2nd.
Rifle.
Very basic. 1.5inch pressure rated PVC as the chamber and 3/4 inch Copper to the modified sprinkler valve. Then a steel barrel. I Originally just had a 3/4 Ball valve but recently changed over to the sprinkler valve. I changed that today after finding this site.. Holy SH*T. I reckon it at least doubles the power. The "snap" is instant.
I think its pretty accurate. I can consistently hit within 4 inches of a bullseye on a dartboard at about 100-120ft.. Blows a hole clean through a piece of 3/4 ply. But i am a really crappy shot.. Never owned a gun and only shot a small few.
I also made the barrel interchangeable so i can fire small ball bearings big/small marbles, golf balls. Anything i find really..
Bazooka
2Inch steel chamber and barrel. 2inch Ball valve that i modified and fluid filmed the SH*T out of so it opens super fast.
I threw the barrel on the pipe threader and reamed out the top so i can slide a potato/apple straight in and the excess cuts away.
This thing fires anything.. a golf ball wrapped in a rag gets shot into oblivion. I can fire apples easily but half the time they explode as they come out of the barrel.. I think maybe the chamber is too big or the barrel a little short..
I have a separate barrel for it which will shoot Snooker/Billiard balls. I have a ton.. Haven't tested that yet
I made it in about 25 mins from random pieces of pipe. I tapped in a pressure gauge. Very basic i know..
I run about 150PSI through both..
Gave them a quick hit of black paint today..
As i said this is my 1st attempt at a gun in any way so if anyone has ANY constructive criticism id LOVE to hear it.. I reckon they are ok for a 1st crack.. I was blown away by the power.. But as i said i've never owned a gun.. They are pretty hard to get a hold of where i am from.
What do you guys think? How could i improve either of them?
Thanks
I just today joined the site and am a 1st time poster. I recently decided i would have a go at building an air gun. I Just found this site and am going to sift through the wealth of info on here.
Anyway i wanted to use parts at work and make something that could fire a readily available ammo. Marbles.. 100 for $1 at the Dollar Store.
I Built the rifle 1st and the Bazooka 2nd.
Rifle.
Very basic. 1.5inch pressure rated PVC as the chamber and 3/4 inch Copper to the modified sprinkler valve. Then a steel barrel. I Originally just had a 3/4 Ball valve but recently changed over to the sprinkler valve. I changed that today after finding this site.. Holy SH*T. I reckon it at least doubles the power. The "snap" is instant.
I think its pretty accurate. I can consistently hit within 4 inches of a bullseye on a dartboard at about 100-120ft.. Blows a hole clean through a piece of 3/4 ply. But i am a really crappy shot.. Never owned a gun and only shot a small few.
I also made the barrel interchangeable so i can fire small ball bearings big/small marbles, golf balls. Anything i find really..
Bazooka
2Inch steel chamber and barrel. 2inch Ball valve that i modified and fluid filmed the SH*T out of so it opens super fast.
I threw the barrel on the pipe threader and reamed out the top so i can slide a potato/apple straight in and the excess cuts away.
This thing fires anything.. a golf ball wrapped in a rag gets shot into oblivion. I can fire apples easily but half the time they explode as they come out of the barrel.. I think maybe the chamber is too big or the barrel a little short..
I have a separate barrel for it which will shoot Snooker/Billiard balls. I have a ton.. Haven't tested that yet
I made it in about 25 mins from random pieces of pipe. I tapped in a pressure gauge. Very basic i know..
I run about 150PSI through both..
Gave them a quick hit of black paint today..
As i said this is my 1st attempt at a gun in any way so if anyone has ANY constructive criticism id LOVE to hear it.. I reckon they are ok for a 1st crack.. I was blown away by the power.. But as i said i've never owned a gun.. They are pretty hard to get a hold of where i am from.
What do you guys think? How could i improve either of them?
Thanks