Page 1 of 1

Ok, Hurry people hurry

Posted: Wed Jul 19, 2006 9:14 pm
by Darkerweb12
Someone do a GGDT for me, because I am unable to download it now.

I need the meters/second velocity for a 1,828 cu. in. chamber, a ball valve opening time, 6 inch barrel diameter and 20 foot length, and 24 lbs of resistance from the projectile...

Posted: Wed Jul 19, 2006 9:18 pm
by Atlantis
What size ball valve? It will have to be pretty big.

Posted: Wed Jul 19, 2006 9:20 pm
by Darkerweb12
It was JUST on the mythbusters 20 minutes ago, its actually a 6 in butterfly valve, spun by pneumatic actuaters, but when they were explaining it, it opend relativly slowly

Posted: Wed Jul 19, 2006 9:21 pm
by Atlantis
I was just watching it, I don't have NOR use GGDT, your brain is much better and I'd prefer to find out the fun way.

Posted: Wed Jul 19, 2006 9:30 pm
by Darkerweb12
Yeah, I'm going to go weld together a 30 foot long steel spudgun, then heat up a couple gallons of water and shoot a 24 lb cannon ball through a chrono at 9:30 at night... yeah...

I'm just asking for someone to do a quick calculation to figure out the distance the cannonball flew before it hit the ground...

Posted: Wed Jul 19, 2006 9:44 pm
by Atlantis
I don't believe anybody has done requests like this before, so don't feel bad if you don't get an answer, just download it when you have time, besides, GGDT measures with air not steam and water.

Posted: Wed Jul 19, 2006 9:50 pm
by Velocity
you can change the type of propellant to helium, oxygen, steam, co2, etc

Posted: Wed Jul 19, 2006 10:41 pm
by Darkerweb12
they didn't do it by the temperature, they had a guage hooked up and it read 68 psi of pressure, wether that pressure comes from air, helium, argon or whatever does not matter as much until you get to extreme pressures...

Posted: Wed Jul 19, 2006 10:52 pm
by SpudStuff
it makes a noticeable differance at ~100psi

Posted: Wed Jul 19, 2006 10:55 pm
by Darkerweb12
ARG... i am not trying to be exact here, i just made a guess about the chamber volume, its about as tall and as wide as Michael Moore, 5-6 feet, and 4 feet in diameter...

I just need a rough estamate

Posted: Thu Jul 20, 2006 12:34 am
by Atlantis
My track coaches name is Michael Moore, wierd. With a title like " Ok, Hurry people hurry" your kinda not caring about things we may or may not have to do, a little patience goes a long way.

Posted: Thu Jul 20, 2006 12:55 am
by CS
Errrr this topic is worthless. If it does not change soon it will be locked to elimnate access by post whores.

Posted: Thu Jul 20, 2006 1:53 am
by Darkerweb12
Ok, I don't really need that GGDT calculation anymore, will a mod lock this thread...