bb barrel trouble!

Building or modifying BB, Airsoft, and pellet types of guns. Target practice only!
Post Reply
to_live
Private 4
Private 4
Posts: 88
Joined: Wed Oct 25, 2006 3:55 am

im going to be using a arrow shaft with an od of 8mm and an id of 6mm as my barrel on my bb sniper, but there is no way i can attach it to the valve! i could use compression fitting but they are hard to find in my area! any ideas?
Top
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Take it to the hardware store and find a threaded brass or steel nipple that has an ID of a tiny bit more than 8mm. Epoxy the arrow shaft into it. The tap a hole in some PVC and screw in the barrel.
Top
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

I did that with my bb gun. I used a 1/4 inch brass nipple, duct tape, and a little epoxy. It works great. Ive never had it fall off or crack or anything like that.
Top
User avatar
experament-u2
Specialist 4
Specialist 4
Posts: 469
Joined: Tue Dec 26, 2006 11:18 pm

or use a bit of air hose clamped around ur barrel and thread it into ur valve with a hose barb threaded bit thingy :lol:
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “BB, Airsoft, and Pellet Guns”