My first and only pneumatic

[Fat Pants]

w00tz0rz just stole my sisters laptop (which has an integrated cam) and finally got some pics!

The schrader has been replaced, new end cap fitted and about 4 inches has been cut off from the chamber.


Whole cannon.


BV. Closed.


End cap with schrader and silencer, which worked at first, but then i blew the end off and it kinda don't work now.


Waste pipe silencer, didn't work, i don't think.


Silencer again.

Comments?

EDIT: Oops, sorry for large pics, i did resize, obviously not enough.

VIDEO:

[youtube]z8FdxAHUbYw[/youtube]

(pasted from uksgc, they know what it's made of already so if anything is unclear just ask and i'll do my best to answer it)

[The_Crackerjack_Man]

Looks nice and clean. But it lookes to me to be too big. How long was the gun before you cut anything off?

[TwitchTheAussie]

Man thats a big gun. Nice but big.

[Fat Pants]

That's the original length in the pics, i had to cut a couple of inches off the chamber (schrader snaped off and the endcap was araldited on (sealing the schrader)) So i had to get the trusty hacksaw out.

Gives a good punch though, good length i guess, nice and accurate/dangerous with 2.5 inch nails.

Everything is 15mm btw.

It's not that big, only about 1.5m

EDIT: Just whacked the tape measure out: Barrel length (muzzle to BV) = 50" (130cm). Overall length (muzzle to end of cannon) = 56" (142cm). Chamber (end cap to end of cannon) =53" 135cm) Bit connecting chamber to barrel (elbow to elbow) = 4.5" (12cm)