SpudFiles

Aequitas, Sniper Air Cannon, by Cash68

Category: Pneumatic

Video:





Stats:

- Material: 3/4 and 1" PVC SCH40, 3/4 CPVC barrel for shooting anything the size of a paintball (Gobstoppers are deadly)
- Valve: Rainbird Solonoid Valve, forget the model number. 1" on both sides.
- Operating Pressure: 50-450psi
- Loading: Bolt action breech
- Barrel I-D: .701"
- Barrel Length: REALLY LONG.
- Chamber I-D: 3/4 SCH40, sleeved with SCH40 1" to even out the form
- Custom Grip
- Heatshield look barrel housing

Aesthetics:

- Chrome Sniper Valve Stem caps
- CPVC Muzzle Brake
- Walther 30mm Top point Red Green dot scope / custom rail.
- LED assault flashlight
- Integrated Laser
- Scope
- Keyswitch to arm, unable to use without the switch

Ammo:

- Standard .68 Paintballs
- Gobstoppers
- Small precision screwdrivers
- Spitwads

Pictures:
here are the pics:





















Fullsize pics:

http://chicane.myftp.org/pics/sniper/sniper.html

been watching the boondock saints

Delete this post

Delete this post

Ease up buddy, jack was merely highlighting the pop-culture reference of your cannon... nothing to be annoyed at. I like the cosmetics especially because this is your first cannon, but somehow I highly doubt that you can run the cannon at 450psi based on the fact that plastic sprinklers are only rated for around 150psi (give or take) and other full copper QEV cannons only go up to around 350psi.

The cannon is really nifty. However, please don't be cocky and sarcastic with other members, especially with people like Jack. Heck, I wouldn't have known the reference if he didn't point that out. Nonetheless, it is still a very nice cannon.

integral wrote:Ease up buddy, jack was merely highlighting the pop-culture reference of your cannon... nothing to be annoyed at.

Except he chose to use the rollseyes smiley, which is a sign of disapproval and superiority.

Anyway, I've used it at 200PSI so far without any problems. I was just saying the pipe was rated for 450psi. I haven't found a pump to get it up past 200PSI yet.

Woops, just noticed my link didn't work for the video. It should work now, so please feel free to check it out.

My server is rather slow for video, so I uploaded it to youtube:

Nice gun but most sprinklers are only rated up to 145psi,you should check your rating.

You can also edit your posts instead of tripple posting using this button:

Also don't harrass other members...thats was hardcore man, hardcore(FMJ)

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.

I like the detail you put in your cannon as shown in the video, well done. The operating pressure of a spudgun is determined by the lowest rated part on your config. That means even if your pipe is rated for 450psi, it doesnt mean that your valve will take it. And come on man, your getting pissed off over a smiley?

LOL, looks like you dug yourself a hole cash...

apology...?

SpudBlaster15 wrote:Didn't PCGUY disqualify you from the contest, for your obvious attempt to boost your post count with 5 posts in a row in order to qualify for the contest?

It's in the "Whats with the 50 post count thing?" thread.

Leave the guy alone and just comment his gun.

Very nice and pretty. As many other people mentioned dont pump it past 150, hell I wouldnt go past 100 to be safe. I dont think youd like having sprinkler shrapnel flying at yo fayce. Good luck man.