SpudFiles

Ive looked and kind of see how piston valve works. But Im really lazy when it comes to thinking. So I wanted to know if anyone has a How To on piston valves?

I always thought piston valves were hard but they are actually quite simple....try searching better next time

here you go...fairly simple to understand.......

http://www.spudfiles.com/spudtech_archi ... hp?t=13265

It's even stickied three threads up..

http://www.spudfiles.com/forums/piston- ... t8157.html


Try searching next time.

I can see that. But my question wasnt how they work it was does anyone have a tutorial on making one?

I searched before I posted.

SpoonZ wrote:I can see that. But my question wasnt how they work it was does anyone have a tutorial on making one?

I searched before I posted.

Oh, sorry to be so presumptious.

For a 2" piston with 1.5" ports, just take a 2" tee, and a 1.25 " cap, and bolt some neoprene onto the 1.25" cap. Stick the cap in the tee and plug up the back. Reduce the barrel end down to 1.5" and bore out the reducer and stick some 1.5" pipe halfway in the tee. Glue a chamber on and attach fill/pilot.

Edit: Video Tutorial. Courtesy of BC Pneumatics.

Goodluck.