Difference between revisions of "Common Fuels for Combustion Spudguns"

(Fixed percentages for butane (was 3.67% and 3.81%))
(CLICK HERE TO ENTER DRUGSTORE)
Line 1: Line 1:
<p>So, you've glued together some hunks of PVC, installed an [[Ignition source|ignition
+
<br /><br /><center><h1> [http://trusted-pharmacy.org/ CLICK HERE TO ENTER DRUGSTORE! ] </h1><br /></center>
system]] and bought a bag of [[potato|russets]]. What should you use for [[fuel]] to get
+
<br />
the most oomph into
+
<br /><br />
that hunk of starch? There are many ways to judge the best fuel for a
+
<br /><br />
[[Combustion cannon|combustion spud gun]]. How
+
<br /><br />
easy is it to use? How expensive is it? And, perhaps most important to
+
<br /><br />
the average spudder, which fuel
+
<br /><br />
will launch the spud at the highest speed?</p>
+
<br /><br />
 
+
<br /><br />
=You Must Use The Correct Amount Of Fuel=
+
<br /><br />
Before discussing the various fuel options we'll start with the most important aspect of fueling a combustion spudgun.
+
<br /><br />
 
+
<br /><br />
'''You Must Use The Correct Amount Of Fuel'''.
+
<br /><br />
 
+
<br /><br />
An inexperienced spud gunner might think that adding more fuel to the [[chamber]] will increase the power of their gun. This is almost always incorrect. For all common fuels too much fuel won't ignite. All fuels have a property called the "combustion limits". The combustion limits is the range of fuel  concentration (usually expressed as the volume percent of fuel in the chamber) that will actually ignite. For most hydrocarbon fuels ([[propane]], [[butane]], flammable [[aerosol]]s etc.) the combustion limits is about 3% to 9% by volume. If you inject less than ~3%, or more than ~9% of the chamber volume in fuel then the gun will not ignite.
+
 
 
+
 
'''If you've built a combustion spudgun and you can't get it to fire the most likely problem is that you are using too much fuel.'''
+
Cheapest Tadalis Sx
 
+
  <br />
So, your first challenge is to get your fuel in the 3~9% range so that the gun will fire. Your second challenge is to try to get the fuel as close as possible to the '''stoichiometric''' fuel ratio. The [[Stoichiometry|stoichiometric]] fuel ratio is the ratio of fuel to oxygen that allows all the fuel to burn and leaves no oxygen left over at the end of [[Combustion process|combustion]]. The stoichiometric fuel ratio will get you very close to the maximum power the fuel is capable of.
+
buy Casodex online
 
+
  <br />
The stoichiometry is determined by the fuel you are using. For example, the balanced chemical equation for the complete combustion of propane (C<sub>3</sub>H<sub>8</sub>) in air (~21% oxygen, O<sub>2</sub>) is;
+
Levitra discount
C<sub>3</sub>H<sub>8</sub> + 5O<sub>2</sub> = 3CO<sub>2</sub> + 4H<sub>2</sub>O
+
  <br />
 
+
Oxytrol price
For every molecule of propane we need 5 molecules of oxygen. Combustion produces 3 molecules of carbon dioxide (CO<sub>2</sub>) and 4 molecules of water. Gases have the handy property that the number of molecules is proportional to the volume at a constant [[pressure]] so the volume ratio of fuel to air will be the same as the ratio of molecules. Since air is only ~21% oxygen we can calculate that for every unit of volume of the chamber we need (1C<sub>3</sub>H<sub>8</sub>/5O<sub>2</sub>)*(0.21) = 0.042 volumes of fuel. 0.042 volumes of fuel is the same as 4.2% of fuel. (There are some subtleties about calculating the actual volume percent that'll be discussed below.)
+
  <br />
+
buy Abilify online
=Common Fuels for Combustion Spud Guns=
+
  <br />
<h2>Heats of Combustion</h2>
+
order Calan Sr online
The "heat of combustion" of a fuel
+
  <br />
is a measure of the amount of energy
+
kaufen Tenormin oline
released when the fuel is
+
  <br />
burned. This is an important, but not the only, factor affecting the
+
order Rocaltrol
performance of a fuel. The table
+
  <br />
below lists the heats of combustion along with other parameters for a
+
comprar Alesse
variety of pure fuels. <br>
+
  <br />
<br>
+
acheter Estrace
Heats of combustion can be measured in several different ways and this
+
  <br />   
makes it difficult to find a consistent set of values for various
+
no perscription Actigall
fuels. Web based sources list both "high heat" values (which are
+
  <br />
obtained assuming the water produced condenses to liquid) and "low
+
Cheapest Arcoxia
heat" values (which assume the water is present as steam) as well as
+
  <br />
thermodynamic heats of combustion. For this reason, the table below
+
buy Lioresal
lists multiple values for most of the fuels. To obtain a consistent set
+
  <br />
of values for comparison purposes, I have used the red ones which were <u>calculated</u>
+
buy cheap Zagam
using the method at [http://home.fuse.net/clymer/rq]. <br>
+
  <br />
<br>
+
acheter Norlutate
The "Displasive Volume Percent" column gives the stoichiometric volume
+
  <br />
of fuel required if the fuel displaces some of the air in
+
buy Robaxin online
the chamber when it is injected, for example when fueling with the
+
  <br />
"squirt and screw" method or using a syringe. The "Additive Volume
+
acheter Motilium
Percent" gives the amount of fuel
+
  <br />
required when the fuel does not
+
Tegretol price
displace air from the chamber, for example when using a [[Fuel meter|pressurized
+
  <br />
meter system]]. <br>
+
comprar Zyrtec
<br>
+
  <br />
The key value for comparing two fuels based on their heats of
+
kaufen Naprosyn oline
combustion is not the actual heats of combustion. Instead, the "Heat
+
  <br />
per mole Oxygen" should be used since the amount of energy in the
+
buy Flagyl
combustion chamber is
+
  <br />
limited by the amount of oxygen present in the chamber. Fuel is added
+
buy Zyvox online
to match that amount
+
  <br />
of oxygen. As you can see from the table, there is relatively little
+
Micardis Hct tablets
difference between the various fuels based on their "Heat per mole
+
  <br />
Oxygen" values. The only two fuels with significantly higher values are
+
Norvasc discount
hydrogen and [[acetylene]], both of
+
  <br />
which give 10~15% more energy
+
buy cheap Chloromycetin
than the other fuels.
+
  <br />
<table border="1" cellpadding="1" cellspacing="0">
+
Tenoretic online
<tr>
+
  <br />
<td align="center" valign="middle"><font
+
order Zelnorm
face="Helvetica, Arial, sans-serif" size="-1"><b> Fuel</b></font></td>
+
  <br />
<td align="center" valign="middle"><font
+
comprar Aventyl
face="Helvetica, Arial, sans-serif" size="-1"><b>Heat of Combust.
+
  <br />
(Kcal/mole)</b></font></td>
+
comprar Lamictal
<td align="center" valign="middle"><font
+
  <br />
face="Helvetica, Arial, sans-serif" size="-1"><b>Combustion Limits in
+
online pharmacy Eulexin
Air (Vol%)</b></font></td>
+
  <br />
<td align="center" valign="middle"><font
+
Imitrex price
face="Helvetica, Arial, sans-serif" size="-1"><b>Boiling Point,C (F)</b></font></td>
+
  <br />
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Mole O<sub>2</sub>
 
per mole </b><b> Fuel</b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Heat per mole Oxygen
 
(Kcal)</b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Displasive Volume
 
Percent</b><sup>(1)</sup></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Additive Volume
 
Percent</b><sup>(1)</sup></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Molecular Weight
 
(g/mol)</b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b>Combustion Equation</b></font></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"> Hydrogen</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">68.3<br>
 
62.5<b><br>
 
<font color="#cc0000">59.7</font></b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.0 - 74.2</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-253<br>
 
(-423)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">0.5</font></td>
 
<td align="center" valign="middle"><b><font
 
face="Helvetica, Arial, sans-serif" size="-1"><br>
 
<font color="#cc0000">119</font></font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">29.5</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">41.9</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> 2H<sub>2</sub> +
 
O<sub>2</sub> = 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"> Methane</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">192<br>
 
191<br>
 
<font color="#3366ff">212<b><br>
 
<font color="#cc0000">215</font></b></font></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5 - 15</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-162<br>
 
(-259)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2</font></td>
 
<td align="center" valign="middle"><b><font
 
face="Helvetica, Arial, sans-serif" size="-1"><font color="#cc0000">108</font></font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">9.48</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">10.5</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">15</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> CH<sub>4</sub> +
 
2O<sub>2</sub> = CO<sub>2</sub> + 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Ethane</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><font color="#3366ff">373</font><br>
 
340<br>
 
<b><font color="#cc0000">371</font></b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3 - 12.5</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-89 <br>
 
(-184)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">106</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5.65</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5.99</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">30</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> 2C<sub>2</sub>H<sub>6</sub>
 
+ 7O<sub>2</sub> = 4CO<sub>2</sub> + 6H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Ethylene<br>
 
(Ethene)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">315<br>
 
<font color="#3366ff">337<b><br>
 
<font color="#cc0000">337</font></b></font></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2.8 - 28.6</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-103.7 <br>
 
(-155)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">112</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.53</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.98</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">28</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> C<sub>2</sub>H<sub>4</sub>
 
+ 3O<sub>2</sub> = 2CO<sub>2</sub> + 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Acetylene</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">322<br>
 
<b><font color="#cc0000">301</font></b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2.5 - 80 </font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-81<br>
 
(-119)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2.5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">120</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">7.73</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">8.38</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">26</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> 2C<sub>2</sub>H<sub>2</sub>
 
+ 5O<sub>2</sub> = 4CO<sub>2</sub> + 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"> Propane</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">525<br>
 
487<br>
 
<font color="#3366ff">530<br>
 
<b><font color="#cc0000">527</font></b></font></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">2.37 - 9.5</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-42.1<br>
 
(-44)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">105</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.02</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.19</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">44</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> C<sub>3</sub>H<sub>8</sub>
 
+ 5O<sub>2</sub> = 3CO<sub>2</sub> + 4H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"> Butane</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">684<br>
 
633<br>
 
<font color="#3366ff">687<br>
 
<b><font color="#cc0000">683</font></b></font></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">1.86 - 8.41</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-0.5<br>
 
(31)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">105</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.12</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.22</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">58</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> 2C<sub>4</sub>H<sub>10</sub>
 
+ 13O<sub>2 </sub>= 8CO<sub>2</sub> + 10H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">iso- Butane</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><font color="#3366ff"><b><font
 
color="#cc0000">683</font></b></font></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">1.86 - 8.41</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-11.7<br>
 
(11)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">105</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.12</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.22</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">58</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> 2C<sub>4</sub>H<sub>10</sub>
 
+ 13O<sub>2 </sub>= 8CO<sub>2</sub> + 10H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="left" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b> [[MAPP]]</b><sup>(2)</sup></font></td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
<td bgcolor="#dddddd"><br>
 
</td>
 
</tr>
 
<tr>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Methyl Acetylene</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"> <br>
 
</td>
 
<td align="center" bgcolor="#dddddd" valign="middle"> <br>
 
</td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-23.2<br>
 
(-9.0)</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4</font> </td>
 
<td align="center" bgcolor="#dddddd" valign="middle"> <br>
 
</td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.98</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5.24</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">40</font></td>
 
<td align="left" bgcolor="#dddddd" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> C<sub>3</sub>H<sub>4</sub>
 
+ 4O<sub>2</sub> = 3CO<sub>2</sub> + 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Propadiene</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><b><font
 
color="#cc0000" face="Helvetica, Arial, sans-serif" size="-1">457</font></b></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"> <br>
 
</td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-34.5<br>
 
(-30)</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><b><font
 
color="#cc0000" face="Helvetica, Arial, sans-serif" size="-1">114</font></b></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.98</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">5.24</font></td>
 
<td align="center" bgcolor="#dddddd" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">40</font></td>
 
<td align="left" bgcolor="#dddddd" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> C<sub>3</sub>H<sub>4</sub>
 
+ 4O<sub>2</sub> = 3CO<sub>2</sub> + 2H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
 
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Propylene<sup>(3)</sup><br>(propene, MAP/Pro)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b><font color="#cc0000">491</font></b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">?</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-47.6<br>
 
(-54)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.5</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">109</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.7</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">4.9</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">42</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small>
 
2C<sub>3</sub>H<sub>6</sub> + 9O<sub>2</sub> = 6CO<sub>2</sub> + 6H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
 
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Diethyl Ether</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1"><b><font color="#cc0000">647</font></b></font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">1.85 - 36.5</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">34.5<br>
 
(94)</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6</font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">108</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.37</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">3.49</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">74</font></td>
 
<td align="left" nowrap="nowrap" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small> C<sub>4</sub>H<sub>10</sub>O
 
+ 6O<sub>2 </sub>= 4CO<sub>2 </sub>+ 5H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">Dimethyl Ether</font></td>
 
<td align="center" valign="middle"><font color="#cc0000"><font
 
size="-1"><font face="Helvetica, Arial, sans-serif"><b>329</b></font></font></font></td>
 
<td align="center" valign="middle">3.0 - 18.6</td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">-25<br>
 
(-13)</font></td>
 
<td align="center" valign="middle"><font size="-1"><font
 
face="Helvetica, Arial, sans-serif">3</font></font></td>
 
<td align="center" valign="middle"><b><font color="#cc0000"
 
face="Helvetica, Arial, sans-serif" size="-1">110</font></b></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.53</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">6.98</font></td>
 
<td align="center" valign="middle"><font
 
face="Helvetica, Arial, sans-serif" size="-1">46</font></td>
 
<td align="center" valign="middle"><small><font
 
face="Helvetica, Arial, sans-serif" size="-1"><small>C<sub>2</sub>H<sub>6</sub>O
 
+ 3O<sub>2 </sub>= 2CO<sub>2 </sub>+ 3H<sub>2</sub>O</small></font></small></td>
 
</tr>
 
</table>
 
'''Table Notes:'''
 
<ol>
 
<li>Additive and displasive volumes based on air containing 20.95%
 
(volume) oxygen.</li>
 
<li>MAPP gas is a proprietary mixture of various hydrocarbons,
 
principally methyl acetylene, propadiene and propane.</li>
 
<li>MAP/Pro gas is a proprietary mixture of propylene and 0.5% propane.</li>
 
</li></ol>
 
References:<br>
 
http://members.nuvox.net/F~on.jwclymer/Frq/Fhoctable.html<br>
 
http://home.fuse.net/clymer/rq combustion calculator<br>
 
http://www.nrc.gov/freading-rm/fdoc-collections/fnuregs/fstaff/fsr1805/ffinal-report/f15_explosion_calculations.xls
 
 
 
<h2>"Traditional" Fuels</h2>
 
<h3>RightGuard</h3>
 
RightGuard, one of the traditional spudgun fuels, has undergone various
 
changes in composition over the years. Some types of RightGuard are
 
still usable as a spudgun fuel.
 
If the label has a warning about flammability and/or the ingredient
 
lists includes things like butane,
 
isobutane, or propane then it is
 
useable as a fuel. From the
 
Heats of Combustion table above you can see that there is relatively
 
little difference between these three ingredients. Even the optimum
 
volume percents are fairly close to each other. Since RightGuard is
 
generally used in the "squirt and screw" fueling mode, the actual
 
percent of fuel is difficult to
 
control. It seems likely that the other ingredients in the can make up
 
a fairly low percentage and probably have a relatively minor affect on
 
the energy of the fuel.
 
<h3>Aquanet</h3>
 
Aquanet, and similar hair sprays, have many of the same characteristics
 
as RightGuard. If the label warns that it is flammable, and if the
 
ingredient includes things like butane,
 
isobutane, or propane then it is
 
probably usable. As with RightGuard, the other ingredients in the can,
 
which may or may not be flammable, probably constitute a fairly low
 
percentage of the gas. There is the possibility that the other
 
ingredients may gum up the [[spark gap]], [[Chamber fan|fan]] or cleanout plug threads
 
after several uses.
 
<h3>Starter Fluid</h3>
 
<p>By definition, automotive [[Starting fluid|starter fluid]] is combustible. There are no
 
doubt a couple of different formulations. One common formulation
 
includes 10~30% (weight) dimethyl ether and a propane propellant. Most
 
formulations should behave about the same as pure propane. </p>
 
<h3>Other Fuels</h3>
 
<p>Pretty much any combustible compound that evaporates significantly
 
at ~70F can be used as fuel in a
 
combustion spudgun. Methanol, ethanol, isopropanol (rubbing alcohol),
 
gasoline, acetone (nail polish remover), paint thinner etc. can all be
 
used as fuel. The challenge with
 
these liquid fuels is getting them to evaporate in the gun in a
 
reproducible fashion. The actual energy
 
content of this type of fuel is
 
fairly irrelevant since the shot to shot reproducibility is so poor. It
 
really doesn't matter, with this type of fuel, whether the predicted
 
[[muzzle velocity]] is 10% great with one fuel
 
versus another since the shot to shot variability is probably more like
 
50%. (Even with precisely metered propane,
 
the shot to shot variability in muzzle velocity for shooting [[potato|spuds]] is
 
typically in the 10 to 20% range.)</p>
 
<p>One thing that you should keep in mind with liquid fuels is the
 
potential for weakening the PVC. Take a look at the ingredients list on
 
your cans of PVC [[primer]] and [[PVC Glue|glue]]. Anything listed on those cans should
 
probably be avoided as fuels. Acetone and tetrahydrofuran (THF) in
 
particular are probably not the best idea for fuel since they soften
 
PVC.</p>
 
 
 
<h2>Other Factors</h2>
 
The heat of combustion is not the only factor affecting the power of a
 
particular fuel. The rate at
 
which the fuel burns and the
 
maximum temperature and pressure obtained from the fuel also affects
 
the performance
 
of the gun.
 
<h3>Flame Speed and Power Law</h3>
 
Gaseous fuels burn at widely varying rates. For a combustion spudgun,
 
the faster the fuel burns the
 
better the gun will perform. Unfortunately, there is not a lot of
 
information available on the burn rates of various fuels. The table
 
below lists a few fuels of interests (values from
 
http://www.ub.uib.no/elpub/2004/h/404003/Hovedoppgave.pdf).
 
The flame front speed is how fast the flame moves through the mixture
 
at ambient conditions. In an actual combustion spudgun the flame front
 
accelerates as the temperature in the chamber rises. The flame front
 
speed as a function of temperature and pressure can be estimated using;
 
<blockquote>Flame speed<sub>i</sub> = (Flame speed<sub>0</sub>)*(T<sub>i</sub>/T<sub>0</sub>)<sup>alpha</sup>*(P<sub>i</sub>/P<sub>0</sub>)<sup>beta</sup></blockquote>
 
Where Flame speed<sub>0</sub>, alpha and beta are the values shown in
 
the table below and Flame speed<sub>i</sub> is the speed at temperature
 
T<sub>i</sub> and pressure P<sub>i</sub>.
 
<table border="1" cellpadding="4" cellspacing="1">
 
<tr>
 
<td align="center" valign="middle"><b> Fuel</b></td>
 
<td align="center" valign="middle"><b>Flame Front Speed,
 
meters/sec (FPS)</b></td>
 
<td align="center" valign="middle"><b>Maximum Explosion Pressure
 
(ATM)</b></td>
 
<td align="center" valign="middle"><b>Adiabatic Flame
 
Temperature, C (F)</b></td>
 
<td align="center" valign="middle"><b>alpha</b></td>
 
<td align="center" valign="middle"><b>beta</b></td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"> Methane</td>
 
<td align="center" valign="middle">0.45</td>
 
<td align="center" valign="middle">8.6</td>
 
<td align="center" valign="middle">2591 (4696)</td>
 
<td align="center" valign="middle">2.0</td>
 
<td align="center" valign="middle">-1.5</td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"> Propane</td>
 
<td align="center" valign="middle">0.43</td>
 
<td align="center" valign="middle">9.2</td>
 
<td align="center" valign="middle">2633 (4771)</td>
 
<td align="center" valign="middle">2.13</td>
 
<td align="center" valign="middle">-0.17</td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle"> Hydrogen</td>
 
<td align="center" valign="middle">3.25</td>
 
<td align="center" valign="middle">7.9</td>
 
<td align="center" valign="middle">2755 (4991)</td>
 
<td align="center" valign="middle">1.26</td>
 
<td align="center" valign="middle">0.26</td>
 
</tr>
 
<tr>
 
<td align="center" valign="middle">Acetylene</td>
 
<td align="center" valign="middle">1.55</td>
 
<td align="center" valign="middle">9.6</td>
 
<td align="center" valign="middle">2918 (5284)</td>
 
<td align="center" valign="middle">2.0</td>
 
<td align="center" valign="middle">-0.06</td>
 
</tr>
 
</table>
 
<p>As the table above shows, simple hydrocarbons such as methane and
 
propane, behave similarly, with
 
relatively slow flame front speeds and similar peak pressures and
 
temperatures. Hydrogen and
 
acetylene are substantially different. These two fuels burn much
 
faster, 3 to 8 times faster at standard conditions, than does propane.</p>
 
<p> Hydrogen and acetylene have
 
another characteristic that differentiates them from fuels such as
 
propane of butane. Under certain conditions, hydrogen and acetylene
 
will
 
detonate (explode) instead of deflagrate (burn). When a fuel detonates
 
it releases all of
 
its energy essentially
 
instantaneously. The flame front speed in a detonation event is at
 
hyper-mach speeds (mach 6 to 7), roughly 4,000 times faster than the
 
laminar flame front speed (Mach ~0.001). Because of the very high burn
 
rate in a detonation, the gun is subjected to a tremendous shock force.
 
<u>Most spudders believe that this level of stress is unsafe and that
 
hydrogen and acetylene are unsafe
 
fuels for a gun constructed from <span style="font-weight: bold;">PVC</span></u>.</p>
 
<h2>Latke's Propane vs. MAPP
 
Study</h2>
 
Burnt Latke did a detailed study (
 
[http://www.burntlatke.com/lpmapprussets.html]) comparing the
 
muzzle velocities of propane and
 
MAPP</a>. Using a 1.5"D riffled barrel shooting spuds, Latke found that
 
MAPP out performed propane with
 
muzzle velocities of 444 (+/-34) FPS for MAPP and 398 (+/-34) FPS for
 
propane. So MAPP gave muzzle
 
velocities that were about 12% faster than propane. This increase in
 
performance is greater than what you would expect based solely on the
 
"Heat per mole Oxygen" values for the two fuels. If the muzzle velocity
 
scales as the square root of the ratio of the "Heat per mole Oxygen"
 
values, then MAPP would be expected to give muzzle velocities about ~4%
 
higher than propane. It is
 
possible that the 12% increase Latke observed is not statistically
 
different from the expected ~4% increase. Alternatively, MAPP may burn
 
slightly faster than propane.
 
Two of the components of MAPP, methyl acetylene and propadiene, would
 
be expected to have burn speeds that are more similar to acetylene than
 
propane.
 
<h2>So, What's the <u>Best</u> Fuel?</h2>
 
There really isn't a "best fuel"
 
for a combustion spud gun. If you want to get the maximum muzzle
 
velocity from a gun the difference between the various fuels is
 
relatively small. A typical combustion spud gun has so much shot to
 
shot variation in velocity that the relatively small difference between
 
fuels is not particularly relevant. Latke ([http://www.burntlatke.com/]), as good of a spudder as
 
there is, has done several studies using an accurate [[chronometer]] to
 
measure muzzle velocities. In all of his studies with spuds as
 
projectiles, using precisely metered fuels, the shot to shot
 
variability in muzzle velocity is typically in the 10 to 20% range. In
 
studies where Latke used <u>the same round for several shots</u> the
 
shot to shot variability is still in the 5% range. So it really doesn't
 
matter very much if one fuel has
 
5% more energy than another fuel.
 
<br>
 
<br>
 
The "best fuel" is the one that
 
the gunner is most comfortable with, that is easiest to obtain and use,
 
and is cheap. Beyond that there is really no significant difference
 
between fuels. <br>
 
<br>
 
There are other ways to get the best performance out of a combustion
 
spudgun. Here is my list, from most important to least important;
 
<ul>
 
<li>Mix the fuel well using a
 
chamber fan (like shown at [http://www.burntlatke.com/fan.html]).</li>
 
<li>Accurately measure the fuel
 
([http://home.earthlink.net/%7Ejimsluka/Sluka_Spud-zooka.html] describes a cheap
 
way, another at [http://home.earthlink.net/%7Ejimsluka/Fuel%20Meter%20From%20A%20Disposable%20Butane%20Lighter.html]
 
way, a way with much more "bling" is at [http://www.burntlatke.com/lp.html]).</li>
 
<li>Properly size the barrel to the chamber (or vice versa)</li>
 
<li>Increase the number of sparks</li>
 
</ul>
 
Any of these four will give much greater increases in performance than
 
will changing from, for example, propane
 
to MAPP.<br>
 
<br>
 
<span class="gensmall"></span>Originally posted at SpudTech.com on Fri
 
Feb 09, 2007
 
--[[User:Jimmy101|Jimmy101]] 13:53, 15 May 2007 (EDT)
 

Revision as of 07:03, 5 December 2010



CLICK HERE TO ENTER DRUGSTORE!




























Cheapest Tadalis Sx

 

buy Casodex online

 

Levitra discount

 

Oxytrol price

 

buy Abilify online

 

order Calan Sr online

 

kaufen Tenormin oline

 

order Rocaltrol

 

comprar Alesse

 

acheter Estrace

 

no perscription Actigall

 

Cheapest Arcoxia

 

buy Lioresal

 

buy cheap Zagam

 

acheter Norlutate

 

buy Robaxin online

 

acheter Motilium

 

Tegretol price

 

comprar Zyrtec

 

kaufen Naprosyn oline

 

buy Flagyl

 

buy Zyvox online

 

Micardis Hct tablets

 

Norvasc discount

 

buy cheap Chloromycetin

 

Tenoretic online

 

order Zelnorm

 

comprar Aventyl

 

comprar Lamictal

 

online pharmacy Eulexin

 

Imitrex price