Neoprene

From SpudFiles Wiki
Revision as of 07:47, 1 June 2008 by Benstern (talk | contribs) (added link)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Neoprene (also known as chloroprene) rubber is widely used in spudguns where a rubber seal is needed, most notably as the sealing surface in diaphragm and piston valves. It is usually sold as flat mats with a thickness of 2-7 mm. It is a relatively hard rubber material, and can stand up to high pressures. Neoprene is easy to cut to shape, and can be glued to a surface using epoxy or super-glue, or attached using nuts and bolts. If an undersized hole is drilled in the material, a bolt is mounted through it and a nut and washer used to put pressure on the rubber, the hole will be airtight.

O-rings are often made of neoprene.