oil on o-rings?

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
marpat
Private 4
Private 4
Posts: 75
Joined: Thu Jun 05, 2008 9:31 pm

Sat Nov 29, 2008 6:13 pm

i just bought a 20 oz paintball co2 tank at cabelas
the urethane o-ring on it seemed dry so i was wondering if it would be safe to put a little rem oil on it to help seal better
User avatar
pocket
Specialist
Specialist
Posts: 148
Joined: Sat Jul 05, 2008 2:44 pm
Location: Grove Hills, Alabama

Sat Nov 29, 2008 11:12 pm

no it will eat the urethane use vasalene it will let it slide on and also improve the life of the o-rings
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Sat Nov 29, 2008 11:35 pm

Use mineral oil.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon

Current Project: Bolt action rifle (25x140mm + 1in shot)
User avatar
pocket
Specialist
Specialist
Posts: 148
Joined: Sat Jul 05, 2008 2:44 pm
Location: Grove Hills, Alabama

Sat Nov 29, 2008 11:56 pm

mineral oil would destroy the o-rings like look what it does to urethane based paints it eats away at them cuz thats essentially what paint thinner s ^^
SEAKING9006
Corporal 3
Corporal 3
Posts: 734
Joined: Mon Jun 23, 2008 3:20 pm
Location: Texas

Sat Nov 29, 2008 11:58 pm

It says on a lot of markers to use mineral oil as a lubricant. Like mine.
Completed projects:
CA1 SMSS Basic Inline
CA3 PDAB Airburst Cannon

Current Project: Bolt action rifle (25x140mm + 1in shot)
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Sun Nov 30, 2008 12:09 am

pocket wrote:no it will eat the urethane use vasalene it will let it slide on and also improve the life of the o-rings
Vaseline can do exactly the same to seals, being a petroleum product.

It's usually unwise to use petroleum oils in a high pressure environment. Now, it's unlikely to be a problem with CO2 (being inert), but it's not a good idea to get into, because you might make the mistake of using it in a pressurized air situation, and it can be dangerous in those cases, given the increased density of oxygen around.
Does that thing kinda look like a big cat to you?
User avatar
Daltonultra
Specialist 3
Specialist 3
United States of America
Posts: 301
Joined: Mon Nov 24, 2008 8:17 pm
Location: Columbus, Ohio, U.S.A.
Has thanked: 1 time
Been thanked: 2 times

Sun Nov 30, 2008 12:53 am

The big problem with using any possibly flammable oil in a high-pressure app is that sudden increases in pressure can cause it to "diesel".

My Father made the mistake of using regular gun oil in his break-barrel pellet pistol. Every so often, the oil explodes when the spring suddenly pressurizes it, exactly like a diesel motor. The thing kicks like a .45 when that happens.
biged
Private 4
Private 4
Posts: 99
Joined: Sat Jun 09, 2007 8:06 am
Been thanked: 1 time

Sun Nov 30, 2008 7:54 am

A pure silicone based lubricant will not harm o-rings of any type.

Silicone Oil: Paslode nail gun oil, $8 a bottle (home depot), great overall lubricant. Thick and sticky.
Silicone Grease: Dielectric Silicone grease, $9 a tube, (automotive stores), great grease.
Silicone Spray: Look for a "Food Grade" silicone spray. Some non-"food grade" silicone sprays will have harmful additives which will break down and deteriorate rubber quickly. Sprays are just a dry lubricant and not really suited for o-rings.

///ed///
User avatar
MaxuS the 2nd
Corporal 2
Corporal 2
Posts: 674
Joined: Sat Jan 19, 2008 3:59 pm

Sun Nov 30, 2008 11:13 am

Or a Lithium based product.
Badman
Post Reply